Do-it-yourself crafts for fishing. Fishing crafts for summer fishing. Manufacturing of accessories

Everyone knows what fishing is. But not everyone can understand the beauty of such gatherings. Some people go not so much to fish as to take a break from home and family in the company of men. Others try to combine fishing with a picnic in nature.

But there are professionals and simply those who like to sit with a fishing rod on the shore or leave the spinning rod and catch a pike perch or asp. They know that depending on the time of day and year, weather, temperature and other things, bait and fishing methods change. I don’t want to constantly buy expensive devices. And then the fishermen begin to make crafts and assemble their fisherman’s box: a spider, a rocker, a platform, a chair for comfortable fishing, and so on.

bait

Of course, experienced fishermen were first concerned with developing bait options. It is used both on the feeder and on the feeder.

There are a huge number of bait recipes:

You can simply use porridge: semolina, oatmeal, cooked with the addition of sunflower oil. But such baits are ineffective, since they have a low viscosity and are easily washed out of the feeder by the current.
One of the reliable options for bait: cookies, breadcrumbs, mixed feed, corn grits (it can be mixed with lightly fried medium-ground flour), semolina, bran and fresh flour. This mixture works great both in reservoirs with standing water and in currents.

By and large, bread, seeds, and makha can be a good bait option
Relatively recently, about 2 years ago, a new type of bait appeared in stores - plasticine. Due to its density, it is not washed away by water, and the betaine additive helps attract fish
Also, there are baits both universal and those that attract a specific type of fish. To make them, simply dilute the dry mixture with water.

In addition to bait, professional fishermen can make their own gear.

Tackle

The situation when the tackle breaks when hooked is, unfortunately, familiar to everyone. In order to quickly replace it, there are devices such as a leash and a carabiner. A carabiner is attached to the main fishing line. This is a latch mechanism to which you can attach both a lure and a new piece of fishing line (lead) with hooks and sinkers.

In addition, such homemade products help to quickly change equipment for catching crucian carp, for example, to asp gear, which, by the way, can also be made at home. To make tackle for this fish you will need fishing line, weights and flies. To make a craft in the form of a fly, you will need a hook with a long shank, fishing line, pliers and fur or feathers. In general, the asp, like any other predator, loves bait that imitates a fry and happily rushes at it.

Scheme for making a front sight

Secure the hook shank in a vice
Tie a small piece of fishing line to it (mounting thread)
You can wrap the top with something shiny, such as lurex
After this, you need to secure the selected material for the front sight on top
Then you need to make a head, cut the remaining piece of fishing line and either coat the head of the fly with varnish or heat it

Using this pattern, you can make any other flies on the tackle. During the long winter, you can thoroughly prepare for spring: stock up on flies and prepare gear for any type of fish.

In addition to a supply of fishing line and hooks, you also need to prepare sinkers. Sometimes they have to be changed during the fishing process, because the wind has changed or the current has become stronger. And on the bottom, for example, there is a light weight sinker. To change the sinker, you just need to take the tackle out of the water, remove the weight from the fishing line using pliers, select the appropriate weight and clamp it.

Since the sinkers are made of lead, there will be no problems with changing them. It is better to store sinkers of different weights in a special fishing box. Also, this is where the platform will come to the rescue.

Extractor

In addition, when catching a predator, a device such as an extractor will not be superfluous. It will help you remove a deeply swallowed hook from the predator’s mouth easily and safely. An extractor can be purchased at a specialized store, but you can also make it yourself.

To make it homemade, you will need the body of an ordinary ballpoint pen, on the edge of which a slot is made for fishing line. When the fish has swallowed the hook deeply, you need to take the extractor and pass the fishing line into the slot. Slide along it to the shank of the hook and hook it. All.

An extractor is a much more humane hook removal device than your fingers. Basically, metal products of this kind go on sale. But, for example, in the cold it will not be very convenient to use them. In addition, a metal extractor may become rusty from water over time.

Also, this device will come to the rescue when a large number of hooks surround the feeder. The extractor is needed not only by spinners. If you catch gobies, then you know that even fry swallow a baited hook almost to the tail.

Landing net

Of course, you will need a landing net. It is necessary for hatching large fish, and also if you are going to fish from a steep bank or bridge. You can make the landing net yourself.

For this craft you will need fine mesh, a stick and stiff wire.
It needs to be bent into a ring and the joint must be soldered.
After this, sew a circular net and sew it along the edge
It is better to sew with fishing line or silk thread
And finally, attach a handle to the almost finished landing net
Make a slot in the edge of the stick, tightly insert a circle of wire with mesh and fill it with, for example, glue or sealant

If you don’t have the desire or time for homemade products, you can buy a landing net in the store. They differ in diameter, cell size, and handle type. Of course, the most convenient option would be a landing net with a folding handle. It's up to you to choose. The main thing is not to forget to take a landing net with you when going fishing.

Rubber

The method of fishing with a rubber band is well known.

In order to do this you need an elastic band, fishing line, weight and leashes with hooks.
The elastic band is attached to a fishing line on which 10-15 leashes are tied
The bait is attached to the hooks and the elastic band with the load is transported on the boat to the selected distance from the shore
The end of the fishing line remains with the one on the shore
Then the weight, rubber band and line are lowered into the water so that the bait disappears under water
Now we just have to wait. Periodically, the fishing line is pulled out of the water, the elastic is tightened and the bait looks more attractive to the fish.

In Kuban, for example, elastic is used when fishing for sabrefish. The bait is pieces of fish. An analogue of an elastic band is a fishing boat.

Spinner - spinner

Many people like to flash their fish in the hope of catching a predator. But it often happens that the spinner clings to something at the bottom or the fish tears it off with a piece of fishing line. To quickly replace a loss in your free time, you need to fill a box with them. Homemade products will also come to the rescue here.

The spinner is made like this:

A petal of the required size is cut from copper or brass
A hole is drilled in it for the clamp
After this, you need to make a recess in the workpiece
The pinwheel has a body. To make it homemade, you need copper wire, which needs to be wound around a drill with a diameter 2 times larger than the diameter of the wire
After this, the ends of the “body” can be bent using a drill
All that remains is to put a couple of beads and our blank on the axis, after which the turntable is ready

A homemade turntable is no different in quality from a purchased one. Such homemade products of different sizes also need to be put in a box, having previously sorted them.

Feeder

You can also make the feeder yourself. For the simplest craft like this you need a plastic bottle:

The top and bottom of this homemade product are cut off, and the future feeder is cut vertically in half
After this, a large number of holes are made in it
Then, a lead plate is attached to the feeder and its edges are bent inward
The last step is to make a wire wrap and a ring for the feeder to cling to

This product also stows away in the fishing box.

Spider

The spider is a fish trap and consists of a net attached to 4 metal arcs tied to a rope with a stick.

For this craft you will need durable metal pipes, a net, a cross and a handle:

The pipes are bent in an arc and attached at one end to the cross. And the network is securely attached to the 4 remaining free ends
After this, the entire structure is attached to the lifting mechanism through the crosspiece. The spider is ready

If the net is fine-mesh, then it will be not so much a spider as a wren. The little fish is necessary for those fishermen who catch predators on a float and serves for catching live bait.

Usually, of all the tackles, it is the little fish that is cast first. While the rest of the gear is being set up, the spider may already have caught the bait. Naturally, not a single fisherman’s box is complete without this item. A spider is necessary for fishing, just like a chair.

Prison

The spear is used for fishing in clear, shallow waters. For example, when salmon go to spawn, a spear will be indispensable. In addition, the spear can be useful when fishing for trout.

But, in general, this is a rather barbaric fishing tool. Basically, the fort was used in those days when there was no professional equipment and no thought was given to a chair.

Plasticine

Baits were discussed above, but plasticine is worth considering in more detail. In order to make plasticine you need a mixture of halva and cake. Knead this mixture thoroughly to form plasticine. More precisely, a mixture with its properties.

The viscosity of plasticine plays a big role in fishing, preventing water from quickly eroding such bait. Plasticine should also be put away in a drawer.

Rocker

A rocker is a winter tackle that you can make yourself.

The rocker is made like this:

A piece is separated from the string, a bend is made in the center, pieces of pipe are put on its sides, and a lead weight is attached to the center
The rocker consists of several such segments. Each one is shorter than the previous one
All that remains is to attach the hooks and the rocker is ready

It is also worth taking a rocker with you. It doesn't take up much space, but it might come in handy.

The chair, as such, is not classified as gear, but it is very useful. It’s worth taking a chair with you, because if you stand fishing all the time, it will soon cease to be fun. Therefore, a chair is necessary. In extreme cases, a folding chair or simply a closed 5L bottle can perform its function.

The fishing platform is the same chair, only it has a built-in tackle box and there are devices for comfortable placement of fishing rods. The platform, as a rule, is manufactured independently. This already applies to serious types of work. Since the platform is made using welding. The platform is, of course, convenient, but not everyone wants to carry such a bandura with them. This may be why the platform is not very popular among amateur fishermen.

Many fishermen devote all their free time to their favorite pastime, looking for any way to go fishing as quickly as possible. And if some cannot imagine life without store-bought tackle and bait, others constantly make fishing tackle with their own hands, claiming that they are no less effective than store-bought products. The main thing is that they are made correctly.

DIY silicone baits

A variety of artificial baits are used for fishing with spinning tackle. Particularly popular are silicone products, which create a high-quality imitation of the behavior of live fish and attract predators well. However, such baits are subject to wear and tear, so with prolonged use, contact with ferocious fish or other mechanical stress, they lose their appearance and are no longer suitable for further fishing. But is there any point in throwing them away after that? Of course not. After all, if you put together several silicones, you can use them to create new, quite attractive attachments.

So, the step-by-step guide for recycling old silicone products is as follows:

Making wobblers at home

Also, many fishermen know how to make homemade wobblers for pike with their own hands, saving themselves from the high costs of purchasing expensive store-bought models. The process itself looks very fun and simple, because it does not require the use of special equipment or tools.

If you are going to make a wobbler, follow these instructions:

Homemade spoons for pike and perch

Another indispensable fishing accessory is a spoon. There are two popular varieties of these lures - rotating and oscillating. The first type is very easy to make, provided that you have minimal skills in working with tools and materials . During the manufacturing process it is necessary to apply:

An ordinary paper clip.
Tee.
A metal plate, 0.5−1 mm thick.
A tiny bead.
A piece of sheet lead.
File, needle files, scissors and pliers.

At the beginning of the work, the shape of a petal for the future bait is drawn on a piece of cardboard, after which the drawing is transferred to the metal. You need to take scissors and carefully cut the petal from a metal blank, after which it should be carefully processed with a file to prevent the appearance of burrs and other defects. Two holes are made along the edges of the petal (one on each edge), and a file is also processed. Places where there are holes can be bent 90 degrees relative to the petal. Next, all that remains is to take the wire and straighten it, and at one end form a loop and install a treble hook.

Then you need to put a petal and a bead on the same wire, and then again form a loop for attaching the fishing line. Moreover, it is important to again make a loop on which the fishing line will be attached so that it does not interfere with the free rotation of the petal.

In order for a homemade bait to work well enough, it must be properly configured using the additional loading method. A lead weight should be installed between the tee and the petal, calculating everything with great care. At the last stage of making the spinner, all that remains is to give it the required color.

Not a secret that to cast the tackle over a long distance from your own location, as well as to reliably immerse the tackle to depth, it is necessary to use a suitable sinker. And although in some cases fishermen use any metal objects with the appropriate weight, if you approach the issue of making a sinker correctly, this will increase the chances of successful fishing in any conditions.

The following requirements apply to a quality sinker:

It must be heavy, so it is preferable to choose lead as the base, which has the highest density among all other materials available to the average fisherman.
It must have a streamlined shape with a perfectly smooth surface, because when casting, the sinker succumbs to aerodynamic forces, and any roughness disrupts the flight range.
It must have a reliable fixation point with the fishing line.
It should remain invisible so as not to cause increased caution in the fish.
It must be accessible.

Making a sinker for fishing with your own hands is not difficult.

Many experienced anglers cast a lead sinker in an aluminum spoon. To do this, take:

First you need to place the selected vessel for smelting on a burner or fire, and then place small lead there. After waiting for the metal to melt, it should be placed in a spoon. After the material hardens, it can be separated from the aluminum surface of the spoon and used as a sinker.

Creating a live bait trap

Not a secret, that the issue of storing live bait for spinning pike fishing worries many fishermen. And if in spring or autumn live bait remains viable for a long time and remains mobile, then in summer they can die in a couple of hours. But catching new ones may take too much time, and the fisherman does not always have the appropriate gear with him. However, if you make a simple and uncomplicated device from two plastic bottles, the problem will automatically disappear.

Step by step guide to making a trap:

So, first you need to take a two-liter bottle and cut off the neck. Then, on the same side, you need to cut off the neck in a wide part, which will allow you to get a part that resembles a watering can. The bottom of this bottle is still cut off.
We take the second bottle and cut off its bottom, at a distance of 5-7 cm from the maximum thickness.
Next, the structure should be assembled by inserting the cut “watering can” back, but now in the opposite way, placing the thinnest section inside. As a result, the structure is connected to each other with artificial threads.
A weight and rope should be attached to the trap.

To test the device in real conditions, you need to place bait in it and lower it to the bottom of the reservoir where fishing takes place. Small fish will immediately become interested in an attractive bait and try to eat it. Once she is trapped, there is no way back. Now, when you need to find live bait, it will always be there.

How to make a do-it-yourself zherlitsa

For winter fishing for predatory fish, in particular pike, as well as large pike perch, it is customary to use a jig and a popular tackle - a girder. And although it was invented a long time ago, many experienced and novice fishermen are constantly interested in making such a tool with their own hands. In fact, it is easy to make a vent, because its design remains simple and uncomplicated.

As the basis for the future gear, a sewer PVC pipe 32 millimeters thick is used, which should be divided into 10-15 cm sections. Any unevenness and external defects can be smoothed out with a file.

Then three holes should be made in the pipe: two are made on one side, one against the other, which is necessary to fix the tripod, and one on the reverse side, where it will act as a line stopper.

The stopper is formed in the shape of the letter “P”, and it should not interfere with the free movement of the fishing line. Then you need to create a ring of fishing line with a diameter of 0.4-0.5 millimeters. Its purpose is to attach the girder to a metal rod that will be driven into the ice. Also, up to 10 meters of fishing line is wound around a piece of pipe, to the end of which a weight and a hook, preferably a tee, are attached.

Homemade baits for crucian carp

In addition to gear and other important devices, many fishermen create effective bait for fish. It is no secret that for each underwater inhabitant it is necessary to select the appropriate bait composition. Otherwise, the desired trophy will simply ignore the offered bait and go deeper.

If we talk about catching crucian carp, then to increase the efficiency of the upcoming fishing, you can use a unique product based on semolina, which should be prepared according to a special recipe.

So, first you need to pour water into a container and add a few drops of flavoring, and then put it on the fire and bring to a boil. Semolina is placed in boiling water and constantly stirred until a homogeneous thick mass is formed. Then the fire is turned off, and the porridge is moved to the appropriate place to cool and steam. As soon as it reaches room temperature, you can begin to knead it with your hands, which will increase its density. Then the porridge is wrapped in several layers of gauze, but not with polyethylene. Based on this mixture, balls are created and placed on a hook.

In addition to the above instructions for making fishing devices, there are many others that are amazing in their effectiveness and ease of installation. Therefore, if you do not want to support someone else's business, and believe that homemade baits and tackle can be effective for any fishing conditions, continue to look for instructions and ways to create such products from available materials.

Attention, only TODAY!

Many fishing enthusiasts devote all their free time to fishing. At the same time, anglers who are in love with their occupation are engaged in the manufacture of fishing tackle, such as baits, tackle, etc.

During the fishing process, some silicone baits lose part of their bodies, and it is a pity to throw them away after that. If you collect several processed silicones, you can use them to make new working baits.

Manufacturing technology

In the prepared container, gypsum is diluted to the state of thick sour cream. After this, old vibrotails or twisters are dipped into the solution to obtain templates; after the plaster has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, they are smoothed out with a sharp, thin object.
The mold prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
All mold filling operations must be performed outdoors or in a well-ventilated area.
Old, used silicone products are crushed into pieces and placed in a bowl that is heated on the stove. To prevent the silicone from burning, it must be stirred regularly, and the fire should be at a distance of 15-20 cm from the container with silicone. If you add dyes to silicone, you can get bait of the desired color, and if you add flavoring, it will become edible silicone.
The well-heated and thoroughly mixed mass is poured into the mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
After about 15-20 minutes, when the silicone has cooled, the finished bait is removed from the mold, the mold is cleaned, greased with sunflower oil and the process is repeated.

Almost always, when fishing, it is necessary to quickly and efficiently change the bait or modify the equipment by changing the leash or feeder. For these purposes, there is a fastener design that is quite small in size. Making it at home will not be difficult.

Manufacturing technology

The following tool is required:
- wire cutters;
- round-nose pliers;
- tweezers.
The basis of the material can be a large stapler from a stapler.
The wire is bent with pliers into a shape similar in appearance to a paper clip, but smaller in size.
Excess ends are cut off with wire cutters.
A cambric of the appropriate size is selected so that it fits freely on the fastener.
The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
A piece of cambric is put on a fishing line and secured with a knot.
Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
Mini clasp, ready to use.

For those who regularly fish from a boat, it will be useful to have a simple but effective feeder. It will come in handy if you have to fish on a river where there is a current. To do this you will need the following elements:

a piece of plastic sewer pipe;
two fasteners;
lead;
electric drill;
rope, rivets;
loop and lock.

A piece of pipe up to 30 cm long is taken and plugs are installed on both sides. One of them is installed solidly, and the other is installed in such a way that it can be easily removed. After this, holes are drilled over the entire surface. A rope is attached to the plug that opens. To prevent the plug from opening on its own, a lock or latch of any design is installed.

On the reverse side, where the plug is rigidly fixed, weights should be secured.

The feeder is lowered to the bottom on a rope and remains there until the end of fishing. Thanks to the drilled holes, the bait is slowly washed out of the feeder, which allows you to keep the fish at the fishing point.

Every spinner wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some fishermen have mastered, and very successfully, making wobblers at home. This is a very interesting and exciting process that does not require special equipment or tools.

How to make a wobbler

To begin with, you should decide on the shape and color of the future bait. To do this, you will have to take up art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. There should be a reinforcing wire running inside them.
Foam can also be used as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, having taken the necessary material, they are engaged in the manufacture of blanks.
Fastenings for rings and tee hooks are prepared from thin stainless steel. The fasteners are mounted in specially cut out places located on the body of the 2 halves of the bait. the two halves are connected using glue. After the glue has dried, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
After this, the wobbler should be adjusted based on personal preferences.
Any depressions or voids left on the bait are filled with epoxy resin, after which the bait is sanded and prepared for painting. Painting is also carried out depending on your own imagination.

It’s not at all difficult to make a rotating spoon yourself, if you have at least some skills in working with tools and materials. For its manufacture you will need:

regular paper clip;
tee (hook);
metal plate, 0.5-1 mm thick;
not a big bead;
a piece of sheet lead;
tools: file, pliers, needle files, scissors.

First, on a piece of cardboard you need to draw the shape of a petal for the future bait, after which the drawing is transferred to the metal. Take scissors and carefully cut out a petal from a piece of metal. After this, the cut petal is processed with a file so that there are no burrs. Two holes are drilled along the edges of the petal (one on each edge) and processed with needle files. The places where the holes are drilled must be bent 90 degrees in relation to the petal. Then you need to take the wire and straighten it, and at one of its ends you need to form a loop and secure the tee.

After this, a petal and a bead are put on the same wire, after which a loop is again formed at the end of the wire to attach the fishing line. Moreover, the loop must be made so that it does not interfere with the free rotation of the petal.

The spinner requires adjustment through additional loading. A lead weight is placed between the tee and the petal. Again, everything needs to be calculated correctly so that the load does not interfere with the rotation of the petal. The last stage is painting the petal.

Arriving for fishing, you have to spend a lot of time catching live bait. The fact is that in the summer it is very difficult to store live bait: it quickly dies in any container, and live bait must always be vigorous. A device made from 2 plastic bottles will help solve this problem:

Take a 2-liter plastic bottle, the neck of which is cut off in half.
After this, the neckline is cut off from the same side at the widest part.
The result is a piece that looks like a watering can.
The bottom of this bottle is cut off.
Take a second bottle and cut off the bottom at a distance of 5-7 cm from the greatest thickness.
Finally, the structure is put together. The cut “watering can” is inserted back, but only in reverse, with the thinnest part inward, after which the structure is firmly connected using artificial threads. Take another bottle and put the cut end on the first bottle with a neck.
A weight and rope are attached to the trap.

After this, you can place bait in the trap and lower the trap to the bottom of the reservoir. A fish that falls into a trap will no longer be able to get out of it. If you need live bait, you just need to pull the trap out of the water. In order for the fry to always be fresh and lively, the trap must be kept in water for an indefinite period of time.

In winter, the most common tool for catching predators (pike) is girders. It turns out that it can be done quickly and simply:

The basis for its manufacture is a PVC sewer pipe, 32 mm thick. The pipe needs to be cut into pieces 10-15 cm in size.
It is better to file all uneven areas where the cuts are made.
3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and on the other side one hole is made for the line stopper. Its diameter is 1 mm.
A line stopper is formed in the shape of the letter P and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
A ring is formed from a fishing line 0.4-0.5 mm thick, which is passed through two holes located opposite each other. This ring will serve as a kind of fastening. The vent is attached to a metal rod firmly driven into the ice.
About 10 meters of fishing line is wound onto a piece of pipe.
A corresponding weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use at the end of the pipe; red tape should be secured at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for crucian carp

The average crucian carp, which most anglers catch, prefers semolina bait prepared according to a special recipe.

Recipe for making catchable bait for crucian carp:

Pour water into a bowl, add a couple of drops of flavoring, and bring to a boil.
Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
The heat is turned off to allow the porridge to cool and steam.
After reaching room temperature, knead the porridge with your hands to obtain even greater density.
After this, the porridge is wrapped in several layers of gauze.
It is not recommended to wrap porridge in plastic.

Balls are molded well from the finished porridge, after which they are placed on a hook.

Recipe for preparing porridge bait using the cold method:

Water is collected from a reservoir into a suitable container and a little flavor is added.
After this, semolina is added to the bowl with vigorous stirring.
As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if you lift the spoon with the porridge up and turn it over, the porridge should remain in the spoon.
Stirring is stopped and the porridge is left for 10 minutes to swell.
Finally, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed onto the hook in a spiral so that the tip of the hook is the last to close.

Manufacturing technology

In the prepared container, gypsum is diluted to the state of thick sour cream. After this, old vibrotails or twisters are dipped into the solution to obtain templates; after the plaster has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, they are smoothed out with a sharp, thin object.
The mold prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
All mold filling operations must be performed outdoors or in a well-ventilated area.
Old, used silicone products are crushed into pieces and placed in a bowl that is heated on the stove. To prevent the silicone from burning, it must be stirred regularly, and the fire should be at a distance of 15-20 cm from the container with silicone. If you add dyes to silicone, you can get bait of the desired color, and if you add flavoring, it will become edible silicone.
The well-heated and thoroughly mixed mass is poured into the mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
After about 15-20 minutes, when the silicone has cooled, the finished bait is removed from the mold, the mold is cleaned, greased with sunflower oil and the process is repeated.

DIY mini clasp for changing attachments

Manufacturing technology

The following tool is required:
- wire cutters;
- round-nose pliers;
- tweezers.
The basis of the material can be a large stapler from a stapler.
The wire is bent with pliers into a shape similar in appearance to a paper clip, but smaller in size.
Excess ends are cut off with wire cutters.
A cambric of the appropriate size is selected so that it fits freely on the fastener.
The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
A piece of cambric is put on a fishing line and secured with a knot.
Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
Mini clasp, ready to use.

Feeder for feeding fish from a boat

a piece of plastic sewer pipe;
two fasteners;
lead;
electric drill;
rope, rivets;
loop and lock.

On the reverse side, where the plug is rigidly fixed, weights should be secured.

DIY wobbler

Every spinner wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some fishermen have mastered, and very successfully, making wobblers at home. This is a very interesting and exciting process that does not require special equipment or tools.

How to make a wobbler

To begin with, you should decide on the shape and color of the future bait. To do this, you will have to take up art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. There should be a reinforcing wire running inside them.
Foam can also be used as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, having taken the necessary material, they are engaged in the manufacture of blanks.
Fastenings for rings and tee hooks are prepared from thin stainless steel. The fasteners are mounted in specially cut out places located on the body of the 2 halves of the bait. the two halves are connected using glue. After the glue has dried, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
After this, the wobbler should be adjusted based on personal preferences.
Any depressions or voids left on the bait are filled with epoxy resin, after which the bait is sanded and prepared for painting. Painting is also carried out depending on your own imagination.

DIY spinner

It’s not at all difficult to make a rotating spoon yourself, if you have at least some skills in working with tools and materials. For its manufacture you will need:

regular paper clip;
tee (hook);
metal plate, 0.5-1 mm thick;
not a big bead;
a piece of sheet lead;
tools: file, pliers, needle files, scissors.

Live bait trap

Take a 2-liter plastic bottle, the neck of which is cut off in half.
After this, the neckline is cut off from the same side at the widest part.
The result is a piece that looks like a watering can.
The bottom of this bottle is cut off.
Take a second bottle and cut off the bottom at a distance of 5-7 cm from the greatest thickness.
Finally, the structure is put together. The cut “watering can” is inserted back, but only in reverse, with the thinnest part inward, after which the structure is firmly connected using artificial threads. Take another bottle and put the cut end on the first bottle with a neck.
A weight and rope are attached to the trap.

DIY zherlitsa

In winter, the most common tool for catching predators (pike) is girders. It turns out that it can be done quickly and simply:

The basis for its manufacture is a PVC sewer pipe, 32 mm thick. The pipe needs to be cut into pieces 10-15 cm in size.
It is better to file all uneven areas where the cuts are made.
3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and on the other side one hole is made for the line stopper. Its diameter is 1 mm.
A line stopper is formed in the shape of the letter P and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
A ring is formed from a fishing line 0.4-0.5 mm thick, which is passed through two holes located opposite each other. This ring will serve as a kind of fastening. The vent is attached to a metal rod firmly driven into the ice.
About 10 meters of fishing line is wound onto a piece of pipe.
A corresponding weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use at the end of the pipe; red tape should be secured at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for crucian carp

The average crucian carp, which most anglers catch, prefers semolina bait prepared according to a special recipe.

Recipe for making catchable bait for crucian carp:

Pour water into a bowl, add a couple of drops of flavoring, and bring to a boil.
Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
The heat is turned off to allow the porridge to cool and steam.
After reaching room temperature, knead the porridge with your hands to obtain even greater density.
After this, the porridge is wrapped in several layers of gauze.
It is not recommended to wrap porridge in plastic.

Balls are molded well from the finished porridge, after which they are placed on a hook.

Recipe for preparing porridge bait using the cold method:

Water is collected from a reservoir into a suitable container and a little flavor is added.
After this, semolina is added to the bowl with vigorous stirring.
As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if you lift the spoon with the porridge up and turn it over, the porridge should remain in the spoon.
Stirring is stopped and the porridge is left for 10 minutes to swell.
Finally, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed onto the hook in a spiral so that the tip of the hook is the last to close.

Feeder made from a plastic bottle

When fishing on a feeder, snags very often occur, and as a result, the loss of an expensive feeder. Many fishermen, for fear of losing their feeder, refuse to fish in promising places. In order not to be afraid of losing it, you need to learn how to make this consumable yourself.

So, a feeder for a feeder made from a plastic bottle:

To make such a feeder, it is advisable to take a green plastic bottle, then cut off the bottom and neck.
The resulting workpiece should be cut into fragments measuring 6x13 cm.
The existing blanks are rolled into a cylinder with an overlap of up to 1 cm and fastened with a stationery stapler.
A piece of sheet lead of a certain mass is attached to the side surface where the feeder is fastened. You need to attach a loop of paper clip to a piece of lead.
Take a soldering iron and make holes in a checkerboard pattern around the entire perimeter of the feeder.
A swivel is inserted into the loop.

The feeder is ready for use. As can be seen from the technology, losing such a feeder will not be so offensive, since its cost is cheap, and you can make a huge number of them.

Therefore, in order not to spend extra money on fishing, it is better to spend a little time and strain your imagination, especially since there is a sufficient amount of used materials that may well be useful on the farm. In addition, no expensive equipment or tools are required; a simple set in the form of a soldering iron and a stapler is sufficient. As practice shows, the result will always be the same, and the costs will be an order of magnitude less.

fishingday.org

Classification

Fishing tricks and homemade products that exist today can be divided into several categories, each of which is distinguished by its practical application. The first of them contains various gear. These can be products that successfully copy foreign analogues, the cost of which is simply fabulous, or real inventions of fishing enthusiasts. This group includes floats and hooks, leashes and spoons, donks, jigs and much more.

In the second category there are fishing tricks and homemade products that have already been sufficiently tested by experience. This also includes complementary foods, various types of baits and attachments, as well as invented fishing methods and techniques. This is a fairly large topic in which questions are discussed about how to fish in one place or another and at one time or another of the year.

The third, quite extensive group includes various accessories - either invented or copied from existing samples. They represent a variety of devices that allow:

Increase the shelf life of fish in hot weather; - dress properly so as not to freeze on the ice in winter;

Save bloodworms and other bait by placing them in special containers.

So, what are the most popular fishing tricks and homemade products that are made from scrap materials?

Toothbrush poppers

Very often, fishing tricks and homemade products literally amaze you with the imagination of the craftsman who made them. This surface bait from a foreign manufacturer can be quite expensive. That is why it makes sense to make it yourself. Poppers, also called walkers, being surface baits, should not sink. Only their slight submersion is permissible. What material can be used that will float well on water? These are toothbrushes that are primarily tested for buoyancy. To do this is quite simple. It is enough to fill an ordinary bucket with water and throw a brush in it. It must float on the surface and not sink.

The work is done using a small grinder with replaceable attachments, which looks like a micro-grinder. Making this clever fishing tackle begins with sawing off the part with bristles from the brush. The resulting edge should be processed with a sandpaper attachment. You will need to make a small hole in the top and bottom. It is necessary for fastening the tee with a ring with a swivel. Next, the homemade bait needs to be tinted. The colors must be bright, for example, green and red. Tees are inserted into the almost finished product. If you test the resulting structure in the bathroom, you will find that due to its heavy weight it is pulled to the bottom. A narrow strip of foam glued on top with superglue will help avoid this. In this option, the popper will float well on the water and will stop sinking.

Wobblers

In a fisherman's workshop, homemade fishing tricks can be made from a variety of materials. However, for wobblers it is best to take birch. This tree is perfectly processed and does not splinter during work. At the first stage of manufacturing the future bait, its body is sharpened using a cutter. After this, the resulting workpiece is processed first with coarse and then with fine sandpaper. In this case, the wobbler will be smooth and will not have any burrs.

The product will require fastening loops, which can be made from cornice string. The wire is bent in the form of a slightly twisted letter “P” (to hold better). In addition, for strength, one end of the letter should be slightly longer than the other. Next, the bracket is driven into the wobbler. To do this, use “nails” cut from wire of the same diameter.

The wobbler must have a certain weight. That is why it is surrounded by inserting a small tin plate into a cut out triangular depression in the abdomen.

At the next stage, the wobblers are painted using gouache. In the most critical places, it is advisable to use a gel pen, which will give the color clarity. After this, the bait should be coated with varnish in 2-3 layers.

Lastly, the blade is inserted. It can be made from unnecessary computer disks with paint removed from one side using a needle. Next, a cut is made in the disk using a hand jigsaw and the part is inserted into the wobbler.

Spinner for pike perch

Fishing tricks and homemade products for fishing can be made from anything. Sometimes even broken tweezers are used for this. This tool itself is of high quality and is made of stainless steel. That is why it can serve as an excellent lure for pike perch. As you know, this fish is a predator characterized by a narrow throat. So the spinner also needs to be narrow. In this case, tweezers are just perfect. From one leg of this cosmetic instrument you will need to cut a piece of the required length. It is sanded a little. This allows you to give the part the desired shape and rid it of small burrs.

The next stage of work is drilling the holes. They are needed to attach the fishing line and tee using swivels and rings. It is worth keeping in mind that this procedure is not easy. The selected material is quite durable, and a thin drill may even break during operation.

At the end of this stage, the threesome is screwed on. It is better to do this from the heaviest side, otherwise the spoon will not hold well in the water. For those who wish to give their product an aesthetic appearance, it is recommended to cut scales on it. This piece of tweezers already has transverse layers. All that remains is to make a few longitudinal, even cuts and the shiny lure for perch or pike perch will be completely ready for fishing. It is worth noting that such homemade products are no worse than branded ones. And the one made from tweezers can even be called the best. After all, in it the tee is located on the heaviest side, which allows you to avoid spinner overturns and overlaps.

Summer trifles

There are many fishing tricks and a huge number of homemade products have been invented that are used not only by beginners, but also by experienced fishermen in the warm season. Summer fishing has its own specifics. During this process, special attention is required to preserve the catch. After all, fish quickly deteriorates in hot weather, and by evening you may just have to throw it away.

Saving what is caught

After the fish has been pulled out of the water onto the shore, it should be carefully (so as not to squeeze the insides) removed from the hook. And if the catch was severely injured, then it should not be placed in a bucket with the rest of the catch. Such actions will lead to the fact that within a few hours all the fish will spoil in the heat.

Wounded prey should be killed and gutted, and then wrapped in fresh grass (preferably nettles). It is better to store such fish in the shade, where it will be blown by the breeze and be cool. If there is no such place nearby, then the gutted prey should simply be salted.

Live storage

For many fishermen, bringing home a live catch is important. To do this, the fish must be stored in water, while being in a kukan or in a cage. The mesh of the latter should not be metal, since the prey will attempt to get out into the reservoir, which will lead to severe injury. You need to hang the cage in the shade, deepening it into the water enough to allow the fish not to bump into each other when swimming. In addition, in cramped conditions, the catch is in danger of self-poisoning with products released as a result of metabolism.

Homemade fish tank

This fishing item is offered by all specialized stores. However, if the cage is branded, then the price for it is set such that not every fisherman can afford to purchase it.

For the summer season, this accessory can be made independently. At the same time, it will be quite wide, long, and, if desired, foldable.

How to make this fishing homemade product? To do this you need to take a strong wire. You can use ready-made metal rings. To create a compact tackle, you will need three of them at once, but with different diameters - large, medium and small. You will also need a nylon mesh. The one that was previously used for windows as protection against mosquitoes will come in handy. A product similar to a sock is sewn from such a mesh. It must match the diameter of the rings. They need to put on such a sock and attach it with small stitches. To keep the fish in the cage you will also need a lid. It is made from a nylon mesh stretched over another wire ring. To secure the entire structure, the fisherman must use small tricks. They consist of using a nylon rope tied to the structure with a secure knot. Otherwise, the fish tank with its catch may float away with the flow. And to prevent the prey from going to the bottom, you can attach a small children's lifebuoy to the upper ring.

DIY floats

Fishermen like to make this small device, which signals a bite, with their own hands. First of all, because there is no point in buying something that you can do yourself. In addition, DIY fishing crafts and tricks are a hobby for many water hunting enthusiasts. And this does not mean that buying a float in a store is impossible due to its high cost. Many fishermen can afford to purchase the best that a modern manufacturer offers. However, the peculiarity of fishing tricks and gear made at home is that they are sometimes the most suitable option for successful fishing.

For many fishermen, homemade floats are much better than store-bought ones. After all, they can be made in any shape and painted in the most pleasing color to the eye. And making this gear is quite simple. Just keep in mind that the first products are unlikely to be ideal. But then, as they gain experience, each fisherman will be able to refine their crafts, as well as come up with different and most unusual options for floats.

Similar gear made from goose feathers is good. This material is easy to find in any body of water that these birds prefer. The feathers they have lost sometimes simply float on the surface of the water. All you have to do is bend down and pick up this unique natural material.

Hand-made floats can be of different sizes. Large ones are for larger fish, and vice versa. You will need to cut off everything unnecessary from the feather, leaving only its base. As a result, only a light, thin, but at the same time quite strong stick will remain in your hands. Everything unnecessary should also be cut off from its upper side. From below, that is, in the place where the feather should be attached to the skin of the bird, you cannot touch it. Otherwise, the resulting float will constantly get wet. To perform these works, which will allow you to make the main part of the float, you will need a sharp stationery knife. After completion of the work, the product is painted in bright colors, which will allow it to be much more noticeable on the water. It's easier to do this with nail polish that is water-resistant. The cut part of the float provides a fastening for fishing line.

Carp fishing

This fish is one of the most popular among professionals and beginner fishing enthusiasts, as it lives in almost every body of water. You can ensure yourself a successful time with a fishing rod if you use a few tricks for catching crucian carp.

And you should start with complementary foods. It is worth keeping in mind that crucian carp are very sensitive to odors. That is why he does not always respond to the complementary foods offered by specialized stores. A little trick for anglers when catching crucian carp is to use regular feed, to which pre-ground roasted seeds have been added. This mixture is pre-wetted. This allows it to settle to the bottom of the reservoir. Crucian carp do not bite very actively when using regular dough with grain flour. To correct the situation, you can add a little valerian tincture to complementary foods.

One of the unusual ways to get an excellent catch is to singe the hooves of cattle over a fire. While still smoking, they are thrown into the water, which contributes to an excellent bite.

There are other fishing tricks and homemade products for crucian carp. So, for a good catch, so-called spring nipples are often used. This type of tackle is designed for the fact that crucian carp likes to suck food from the bottom into its mouth. That is why hooks are taken on short leashes and then hidden in bait located in feeders made from bottle caps, as well as from wire twisted into a spring with a concave lead plate. During feeding, the crucian carp swallows the bait, and with it the hooks.

In the cold season

There are also winter fishing tricks and homemade products. They make fishing easier and create a certain comfort when a person is in difficult weather conditions. One of the accessories that is not at all difficult to make with your own hands is a gaff. For it you will need a handle from an old umbrella and a sharpened metal rod. You can take an electrode from which the insulating layer has previously been knocked off. One end of such a metal rod should be sharpened and bent into the shape of a hook, and the other should be flattened on an anvil. You will also need a plastic dowel for the hook. It is put on the rod, sliding it to its flattened part. Next, the dowel is inserted into the umbrella tube. It is fixed to it by flattening.

Many fishing tricks and homemade products for winter fishing protect a person with a fishing rod from various kinds of dangers. So, every fisherman moving on ice needs to carry so-called life preservers. These are two wooden handles turned on a lathe, in each of which a sharpened steel pin is fixed using epoxy glue. These parts are connected to each other with a rope, the length of which is 30-50 cm less than the height of the fisherman. “Rescue bags” are worn around the neck. If a fisherman falls through the ice, he must stick the pins into the edge near the water and climb up, standing on the rope as a step.

Many fishing tricks and homemade products, the ideas of which are presented above, have been actively used by anglers in many countries for decades.

www.syl.ru

DIY fishing crafts, tackle and equipment for do-it-yourself fishing. Novosibirsk fishermen website

Sort by: by date by comments by rating

When fishing in winter, everyone is faced with the problem of protecting the hole from wind and drifting snow. You can climb into a tent, but then fishing becomes less mobile. You try to block the hole with your boot...

Hello. I think every fisherman comes to a point in his career when he wants to make something with his own hands (baits). So I decided to try my hand at this aspect of creativity. On...

To make a rack for spinning rods we will need: 1 Plywood boards (trash) 2 Screwdriver 3 Drill 4 Some kind of thing for 30 mm 5 Self-tapping screws 6 Saw 7 Pencil 8 Tape measure 9 Hands are not from the ass It seems to me...

I decided to make a landing net for my husband. For this we will need: 1 PVC pipe 2 Electrical tape 3 Nylon threads. 4 Net 5 ax 6 scissors Take and bend a pipe like a racket; the excess can be cut off with an ax or...

Hi all! I want to tell you about such interesting equipment as microturbines. To make it you will need: a leash - string number 1 or just string number 1, tees or various...

Hi all! I often fish on UL when entering the water. It was very inconvenient to change baits. I didn’t want to buy a bag with a holder, since it is more massive than the one I took for a small set...

Why did I decide to make it myself and not buy it? At least the same Chinese one, which is sold in almost every fishing store, I don’t know. Maybe it’s because it’s more convenient than a cage, it doesn’t take up much...

Obamazoid is my pride. This is a true spinning streamer because any spinner can make it without any fly tying tools. And he catches fish no worse than store-bought ones...

For a long time I set out to make a hook that would be lightweight and fit into a winter box. Before that there were long hooks - you had to attach them to the drill, which is not very convenient. It’s also not possible to buy store-bought ones...

←previousnext→

www.fishingsib.ru

Fishing crafts for summer fishing - how to make them yourself

Spoons are generally divided into types according to different principles - you can look at them by season, and then it turns out that there are winter and summer spoons. If you divide by catch, then the species will be as follows - perch, pike, etc. You can also use the principle of operation as a basis for dividing into types - oscillating, rotating and others.

An oscillating spoon is well suited for summer fishing - it is a metal plate, which, thanks to its design, can make movements in a certain rhythm, which attracts fish.

A rotating spoon is no less effective - during the retrieve, the rod begins to rotate, attracting fish with its movements. There are also acoustic spoons - they are very effective because fish are sensitive to sounds.

The simplest ones are simply made from two plates, which create a ringing sound when they touch. The Devon spinner, in turn, imitates a fast fish. Its only serious drawback is that it constantly twists the line. Non-snagging spinners are also known - they are used mainly to avoid snagging.

You can also make a spinner yourself - there is nothing complicated about it, and the result is many times superior to mass stamping. It’s not for nothing that most professional fishermen make their own lures. First you need to choose a material - any metal will do.

Although it is better to avoid aluminum - it plays very poorly. The plate must be free of nicks, rust, etc. - thickness from half a millimeter to eight tenths. A large spinner can reach one and a half millimeters. After cutting out the shape, the plate is sanded and leveled.

After testing for play and catch, the spinners are manufactured according to this option. Before use, it would be a good idea to sand the metal with felt or felt - you can use blade mastic or crocus as a lubricant.

Feeders

Fish feeders have been made for many years - with the development of technology, more and more new types are appearing, and they are constantly being improved. The advantage of feeders is that you can cast them quite far, thus counting on large fish, as well as a good result and the absence of a snag.

Today, feeder feeders and carp feeders are made - the former are much more universal, and the latter are used mainly for carp, since they are larger.

You can also divide feeders into types according to shape - square, oval, spring, etc. The choice is wide - the main thing is to decide in advance where the feeders will be used.

In addition, they are made open and closed - the latter are suitable for animal feed, and the former for vegetable and cereals.

The materials used to make feeders are different - plastic is cheaper, but it is short-lived, but metal will last longer, especially if it is coated with an anti-corrosion compound, although such feeders are not cheap.

You can make a feeder yourself - also from plastic or metal. The first can be made from a plastic bottle - the neck and bottom are cut off from it, and the cylinder is cut across. The plastic sheet should be about 6 by 12-13 cm in size. The hole points are marked on the plastic sheet, at a distance of about two centimeters.

The cylinder is closed with an overlap and fastened with paper clips. Afterwards, the holes themselves are burned out - they can also be punched with a hole punch or drilled. When the base is ready, you need to cover the joint with a lead strip and put a fastening unit on one end - after this the plate is compressed at both ends.

A metal feeder is more difficult to make and requires a lot of materials and tools.

floats

Floats have been used for a long time, since they are the ones that signal when a fish is biting. Today, goose feathers have been replaced by modern, high-tech models, but their essence has remained unchanged. For fly fishing rods, light floats with a small weight are used - they allow you to notice even the slightest movement.

For match and Bolognese fishing rods, “wagglers” are usually used. For deep fishing, you need a float with a blind mount, and if the depth exceeds the length of the fishing rod, then the mount must be sliding. During plug fishing, ultra-sensitive, carp and flat floats are used.

To make a float at home, you need to have some equipment and materials. It is best to make floats in several pieces - it just saves time.

So, one float shape can be made in different sizes. You need to make a blank with a jigsaw or knife.

It is best to leave a length margin of a centimeter or one and a half, and a thickness of 3-4 mm.

To find the center, draw diagonals at the ends. For the keel, steel wire is used, which must be tinned.

In the center at the end you need to insert the keel a centimeter, maybe one and a half.

After checking, dip the keel in epoxy glue and put it back in place. When everything is dry, the workpiece is shaped into a float - the edges of the main cylinder are cut off, and a smaller cylinder is made on the side opposite the keel.

Next, the workpiece is given its final shape, followed by grinding. A float ring is made from thin wire, leaving 5-7 mm ends. An antenna 3-5 cm in size is made from the same wire from which the keel was made and glued in place of the cut thin cylinder. The ring is glued just below the top of the float.

Afterwards, you just need to paint the float - for greater brightness of the antenna, you can use wire casings (preferably white). The paints should be waterproof, and they should not be applied in a very thick layer. It will take a day or two for the float to dry.

Mugs

Fishing mugs are used for catching predatory fish - they are made from a disk, a stick and equipment, which, in turn, consists of a line, a weight and a leash (for pike), as well as a tee.

Since we do not produce high-quality mugs, it is best to use homemade mugs. To make such a device, you first need to cut out a shape from foam plastic and sand it with sandpaper. In the center of the workpiece you need to drill a hole one and a half centimeters in diameter, into which a sleeve with its own hole, but already 8-9 mm, is inserted.

The bottom side of the disk should be painted white, and the top side red. The mast should be made of coniferous wood in the form of a truncated cone.

It will be fifteen centimeters long, with a diameter of 6 to 12 mm from top to butt.

Since coniferous trees are quite soft, no equipment is needed - just a simple knife.

The keel head is more difficult - you need a lathe here, since its shape should be like that of an egg.

If all the work is done on a machine, then the mast will generally be smooth and even.

A blind hole is made in the keel head, which is necessary to insert the mast head there - for good fastening, it is filled with epoxy resin. The last thing left is to equip the circle.

It is better to make the main line from a nylon cord with a cross-section of half a millimeter. The length is determined individually - several meters longer than the deepest place in the intended fishing spot.

fishing rods

An ordinary fishing rod consists of several parts - the rod itself, the float, fishing line, hook, sinker, reel and leader. The fishing rod is made of wood - you can use hazel or birch, use a pebble as a sinker, and a feather or cork as a float. Naturally, such a primitive fishing rod will not catch many fish.

It is much more difficult to make a spinning rod yourself, but it is generally a professional device for fishing. The fishing rod here is made of cork or wood, but plastic can also be used.

In addition, you definitely need a reel - long distance is important for spinning, and without a reel you won’t be able to pull the fish out of there. The fishing line is attached along the entire length of the rod, and is released behind it - a bait for predatory fish species is suspended at the end.

Snaps

Today there are many baits, and even more types of equipment.

The classic equipment is a weight-head and a hook soldered into it. The weight can be of different shapes - a ball or an ellipse, a rugby or a hoof.

It is not difficult to make such a bait at home, although it will require some skill and special equipment - you need to grind out a weight and solder a small ring and a hook to it. Actually, this is all that is needed to make classic equipment.

Hinged mounting means that there are two fastenings on the weight - one for the main line and hook, and the other for the offset hook and bait.

Making one with your own hands is only a little more difficult than classic equipment - you just need to solder an additional fastener.

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective ones:

Cool activator. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates their appetite. It is a pity that Rosprirodnadzor wants to ban its sale.
More sensitive gear. Reviews and instructions for other types of gear you can find on the pages of my site.
Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Nods

For summer fishing, side nods are best suited. They are not made at all factories, and therefore they are available mainly in large cities - for other settlements only hand-made production is suitable.

First, you need to cut a thin sliver from the knee of the telescopic rod - the length should be at least 15 cm. The sliver must be cleaned and sanded with sandpaper.

Afterwards, a ring is made from the wire with one end several centimeters in length - the end should extend from the ring at a right angle.

In addition, you can put a heat tube on the nod and melt it - this way there is no need to paint it, and also test for flexibility.

Homemade boats

The boat is well suited for relaxing fishing, but not everyone can afford to buy such a device - but there is a way out. You can make a boat with your own hands. It is best to make such a boat from wood - this way you can even make it large enough for two.

The materials you will need are ash and five-millimeter plywood. First you need to make the frames and keel.

The latter is best made from one board, but you can glue two together, although this will make the boat not so strong. The frames are wedged in the grooves of the keel, and the bottom of the boat is fitted to them.

The assembly of the frame ends with the fastening of two more slats - not screws to the right and left of the longitudinal one.

The next stage involves turning the boat over on the trestles. The frames are processed with a rasp so that they fit snugly against the curved rail being pressed.

The skin pieces are cut out of plywood and attached to the boat using a generous amount of epoxy glue.

In addition, fairly large clamps also facilitate fastening. Each component must be planed so that the next one fits as tightly as possible - any remaining glue that is not used for fastening must be removed with a linen rag soaked in acetone.

Afterwards, the fastening of the remaining parts begins - the upper strips, the rear part of the boat, fenders, seat supports, breshtuk, brackets, etc.

Fishing knots

In the process of fishing, many types of fishing knots are used - and they are all divided into categories according to their intended purpose. For example, there are knots for hooks and lures, loops, for attaching fishing line to a reel and for tying fishing lines.

For a spatula hook that does not have a knot, a basic fisherman's knot is usually used. For large hooks, use the Dumhof knot. The leash knot is convenient because it does not damage the fishing line.

Many fishermen also use stopper knots to limit the depth of a sliding cast or to control casting distance.

Production of mesh fabric. How to knit a net?

If earlier nets were made from vegetable ropes, now they are mainly nylon, perlon or thick nylon threads - they are not only stronger and do not rot, but also show much better performance in terms of catch.

Delhi is knitted on a shuttle - you need to prepare enough thread in advance and wind it on the shuttle. Winding is done using a certain technology - you need to wrap a thread around the inner peg, the fork at the end, and then the peg on the other side.

You also need a thin plate of wood - the width of such a shelf depends on the size of the cells you need. The finished meshes are hung on a nail so that the knot on them is between the left end of the mesh and the nail.

To connect the pieces, you need to hang them on the nails with the outermost cells, and connect them in places where they should be connected more carefully, and in this method you need to tie the rope alternately to one and the other edge, just like when knitting a net.

Homemade sprays for summer fishing

The simplest recipe for the spray is vanilla and water. Add vanilla powder or liquid to hot water, and then pour it into a spray bottle. Fruit sprays use fruit essences as a base - they have a very rich aroma.

You can also combine different scents - for example, by mixing strawberry essence, vanilla and cocoa in water, you need to bring the container to a boil, and then pour it into bottles.

When fishing, it is best to take several types of sprays - who knows what kind of fish will go today? For crucian carp, for example, it is best to use sunflower oil and garlic.

To briefly summarize all of the above, we can say that summer fishing is quite troublesome, but nevertheless brings joy and pleasure. Moreover, almost everything you need can be prepared with your own hands without much difficulty.

Just give our craftsmen from the people a reason to make something. A special article is fishing tricks and homemade products. Firstly, they performed (and sometimes continue to perform) purely practical functions in the era of a total shortage of goods for fishing. This is now for you and wobblers, and twisters, and bloodworms, and telescopic fishing rods - all kinds of good in bulk (although not always of high quality, but for serious companies - you will go broke). And I remember there was a time when a standing hook or a Klin fishing line - during the day with fire. So the fishing people contrived as best they could. And I must say, he did it very well and efficiently, and most importantly - functionally.

Classification attempt

All fishing tricks and homemade products can probably be divided into several large categories in the context of their practical application. Firstly, these are all kinds of gear, or copying (with constant success) foreign fabulous analogues, or real inventions, which, in turn, were copied without a twinge of conscience by Western manufacturing companies (since, of course, none of the fishermen received a patent ). This broad group includes hooks, floats, spinners, leashes, mormyshkas, donks and much more. Secondly, fishing tricks and homemade products are proven by experience and even invented methods and methods of fishing, feeding, types of baits and baits. This all relates to the big topic: exactly how to fish in different places and at different times of the year.

Accessories

The third large group includes fishing accessories, invented or copied from already existing samples. These are all sorts of devices for longer storage of fish in the summer when fishing, winter subtleties in terms of equipment on ice, used in order not to freeze, containers for saving bloodworms and other baits. All of them, with rare exceptions, are a real storehouse of folk wisdom, a book of fishing luck. So, to your attention - a small hit parade of homemade products made from what came to hand by the fishermen themselves.

Toothbrush poppers

Fishing tricks and homemade products sometimes amaze with a fantasy game. Since the newfangled imported items are quite expensive, it clearly makes logical sense to make them yourself. Poppers or walkers are surface baits, so they should not sink. A slight sinking is allowed, but still - the material should be quite well kept on the water. Therefore, first you need to check the toothbrushes for buoyancy. This can be done by collecting water in an ordinary bucket and throwing a brush into it. If it does not sink, but stays on the surface, then it is the very thing. We work with a small grinder, resembling a micro grinder, with removable nozzles. Saw off the part with bristles. We process the edge with a nozzle with sandpaper. In the lower and upper parts, it is necessary to make a hole for attaching the lower tee (attached with a ring with a swivel). We tint the homemade bait (in this case, you can choose red and green - bright colors). Insert tees. A test in a bath of water shows that the weight of the tees is sufficient to sink the structure. To prevent this from happening, glue a narrow strip cut out of foam on top of the nozzle with superglue. Now the popper does not sink and keeps well on the water.

Wobblers

If we make a wobbler, then in front of the structure we also cut in an additional blade (it can be built from a plastic bottle cap by cutting out a small part). You can paint with bright nail polish borrowed from your wife. You can insert an additional weight for weighting. But in our case, the design turned out to be quite the right weight, and it flies far when casting. This is how simple toothbrushes can serve as starting material for spinning lures.

Spinner for pike perch from broken tweezers

Fishing homemade products are sometimes made from anything. But even from a broken tweezer. The tool is of high quality (it used to be), made of good stainless steel. What is not a lure for a pike perch. As you know, these predators have a rather narrow throat, and the lure is also needed not wide - just right! So, from one leg of the tweezers we cut off the workpiece of the required length. A little sanding, shaping and getting rid of small burrs. Now we drill holes where the tee and fishing line will be connected using rings and swivels. It is not so easy to do this procedure: you can even break a thin drill, since the material is strong enough. Well, it's done. We fasten the tee (preferably on the heavier side, so the lure will be more stable in the water column). For aesthetes: you can cut scales with the same grinder (there are already transverse layers from tweezers) - just make a couple of uniform cuts along, and a scaly shiny lure for pike perch or perch is ready for use. Such homemade products for fishermen are practically no different from the notorious branded ones. This one turned out even better: the analogue has a tee on the less heavy side, which leads to overlaps and a flip of the spinner.

Fishing little things in summer

Homemade fishing in the warm season can be very useful for both beginners and experienced fishermen. Summer fishing has its own specifics. Great attention should be paid to the preservation of the catch, as in the heat the fish can deteriorate very quickly. And the catch caught in the morning, without proper preservation (and in the field, rarely anyone has a freezer box - except perhaps some motorists) may simply not survive until the evening.

How to save what you catch

After playing and pulling the fish ashore, carefully, without pinching the insides, we release it from the hook (otherwise it will quickly die out). You should also not throw a badly injured fish into a bucket with the rest of the caught ones - it can ruin the entire catch in a few hours in the heat. Wounded prey is best killed, gills removed and gutted. Next - wrap in fresh grass (nettle is the best option) and store in the shade, preferably where there is coolness and breeze.
Gutted and de-gilled fish can also be salted before being stored.

Live storage

If you intend to bring home live prey, you need to store it in the water, in a cage or on a kukan (a kukan is good for spearfishing, for example). And the cage should be with fairly wide rings, the mesh should not be metal, but cloth. On metal, when trying to escape, the fish will be severely injured. Hang it, deepening into the water, you need in the shade. So that the fish can swim safely and not fight against each other. In a close cage, there is also a great danger of self-poisoning of the catch by metabolic products.

Homemade cage

More about fishing crafts. A good branded cage is quite expensive - not every angler can afford such a luxury. But a cage for storing catch in the summer, long enough and wide (and, importantly, foldable) can be made independently. To do this, we will need a strong steel wire or ready-made rings from it. If you need a compact device, we take three rings of descending sizes. Medium is in the middle, small is at the top. You will also need a nylon mesh (which was used for windows from mosquitoes to the widespread insertion of metal-plastic ones). From the mesh we sew, as it were, a sock according to the size of the rings. We put on and sew firmly to the rings with stitches. We make sure that the garden is uniform and neat. To prevent the fish from jumping out of the cage, you also need a lid. It can be made from another ring of wire with a mesh stretched over it. Little tricks for the fisherman: our homemade cage is attached with a strong nylon rope, which must be tied to the structure with a knot so that it does not float away with the catch, for example. And so that the home-made cage does not flood, if you fish at great depths, you can put a children's lifebuoy on top of it, as in the photo. Please note that the cage is easy to fold and transport when moving to the fishing spot on foot.

sensitive float

Let's make fishing tackle with our own hands. Of course, a great variety of floats of different colors and sizes is offered to the attention in a store or on the market. But choosing a good one costs good money. And if you are a fan of fishing with float rods, you need to buy a dozen floats. And many fishermen prefer to make their own floats the old fashioned way. Very well, these tackles are obtained from goose feathers. Where there is a lake or a pond, a river, these birds are sure to graze. And sometimes they lose their feathers. So it remains only to bend down and pick up. You can make large floats on and small ones (depending on the size of the pen). We cut off everything unnecessary, leaving only the base of the pen. It turns out such a thin stick, light and quite durable. We measure the size of the product. We cut off the unnecessary from the upper side (from below, in the place where the feather was attached to the skin of the bird, the design should have its original appearance, the opposite will lead to the float getting wet). It is convenient to work with a sharp clerical knife. In principle, the main part is done. We paint the float in bright colors so that it can be seen on the water. The easiest way to do this is with nail polish, which comes in a variety of fairly bright colors. In addition, the varnish is waterproof. We attach a mount to the cut off part of the float, where the fishing line will be threaded. You can go fishing. But before that - two or three more little tricks for successful fishing.

How to balance a float at home

Often, upon arrival at the float rods, the poor balance of the floats interferes (they are blown away by the current or they lie down for no apparent reason). And on the spot, especially in rainy or windy weather, you don’t want to do this, but you have to. Therefore, the most correct solution is to balance the floats in advance, at home. You can do this by taking a full bath of water and uncovering your gear. So, we tie the float to the fishing line (or fasten it to the mount) and begin the process of selecting weights. The float should not lift the sinker from the bottom. But the load should not be too weighty, as small bites will not be visible. We find by experience the golden mean (a lead weight that is too heavy can be cut well with scissors for metal, and if it is too small, add another piece of lead). The float in the bathroom should stand clearly, almost vertically, without lifting the sinker from the bottom, but not lying on its side. Now your fishing homemade products are well balanced and you don’t have to do this in nature. This is especially important in adverse weather conditions.

Fishing crafts: a tube for storing floats

For removable floats - one of the most important parts of the tackle. However, some of them are quite fragile and can break when moving the fisherman from place to place. In order to prevent this from happening, we will make a tube for storing floats with our own hands. We take the base from the Tuba, which is very strong. Even if you accidentally step on it, it will not break like plastic, and your floats will be intact. A piece of loose foam about 2 cm thick is also needed. Two plugs must be cut out of it. We make an imprint of the bobbin from under the film on the foam, cut it out with a clerical knife. One plug should fit into the hole of the tube very tightly. To do this, you can glue it, or use the second one - it acts as a cap. As a handle for easy removal, we use a stuck paper clip. The floats are fastened from the inside with keels to the foam, fixing well. The lid closes on the other side. And in order to prevent the cardboard from getting wet, for example, in the rain, you need to wrap the structure around the circumference with adhesive tape additionally.

Fishing crafts - a piggy bank of fishing experience

Many generations of amateur fishermen pass on their secrets to each other. And today, despite the abundance of fish products on offer, someone else needs these fishing tricks. Of course, no one can know everything about fishing. But the above and other tips, we hope, will be useful to both beginners and more experienced anglers. Happy fishing everyone!

All about car tuning

Do-it-yourself crafts for fishing. Fishing crafts for summer fishing. Manufacturing of accessories

bait

Tackle

Scheme for making a front sight

Extractor

Landing net

Rubber

Spinner - spinner

Feeder

Spider

Prison

Plasticine

Rocker

DIY silicone baits

Making wobblers at home

Homemade spoons for pike and perch

Creating a live bait trap

How to make a do-it-yourself zherlitsa

Homemade baits for crucian carp

Manufacturing technology

Manufacturing technology

How to make a wobbler

Making bait for crucian carp

Manufacturing technology

DIY mini clasp for changing attachments

Manufacturing technology

Feeder for feeding fish from a boat

DIY wobbler

How to make a wobbler

DIY spinner

Live bait trap

DIY zherlitsa

Making bait for crucian carp

Feeder made from a plastic bottle

Classification

Toothbrush poppers

Wobblers

Spinner for pike perch

Summer trifles

Saving what is caught

Live storage

Homemade fish tank

DIY floats

Carp fishing

In the cold season

DIY fishing crafts, tackle and equipment for do-it-yourself fishing. Novosibirsk fishermen website

Fishing crafts for summer fishing - how to make them yourself

Feeders

floats

Mugs

fishing rods

Snaps

Nods

Homemade boats

Fishing knots

Production of mesh fabric. How to knit a net?

Homemade sprays for summer fishing

Classification attempt

Accessories

Toothbrush poppers

Wobblers

Spinner for pike perch from broken tweezers

Fishing little things in summer

How to save what you catch

Live storage

Homemade cage

sensitive float

How to balance a float at home

Fishing crafts: a tube for storing floats

Fishing crafts - a piggy bank of fishing experience