DIY winter fishing box. How to make a do-it-yourself fishing box for winter fishing: the choice of materials and manufacturing procedure Making a winter fishing box

It is impossible to imagine an ice fisherman without an ice fishing box. Beginners on their first try try to come up with something or borrow this main accessory after a fishing rod from more experienced comrades. Without a charabanc, ice fishing turns into a search for a way to get comfortable.

Features of selection and purpose

There are many areas of application for a fishing box. The main task is to store and transport all equipment to the fishing site: baits, baits, jigs, fishing rods and much more. It is also used as a catch storage point. Its design is such that it can serve as a comfortable seating area, eliminating the need to carry a stool with you. In search of a cool place, fishermen often go quite far, and every additional gram of luggage can always be unnecessary, so you need to take into account the weight of the box itself.

When choosing an option suitable for ice fishing, you also need to pay attention to the following properties:

When choosing or making a fishing box for winter fishing with your own hands, you need to take into account the way the owner prefers to fish. Its volume depends on this.

For those who prefer vertical lures, you don’t need a lot of gear: spoons, balancers, one or two fishing rods don’t take up much space. This is how they fish for perch or pike perch, covering a considerable distance when moving from one fishing point to another. This method of fishing involves getting up frequently to continue moving, so the box should be light, tall and small in size.

Having found a good place with frequent bites, jigs and floaters stay there for a long time. In addition to gear and other accessories, they have groundbait, different types of bait, a scoop for cleaning the hole and a tent that protects from the wind. Usually, a low rise with this method is more convenient, so the box should be voluminous and squat.

A capacious charabanc is needed by those who like to fish for predatory fish. The set consists of a dozen girders, a hook, a yawner, an extractor and various other equipment. Due to the length of the process, an extended supply of food and drinks is necessary. Fans of combined fishing need a box of medium height and dimensions.

What the charabanc is made of affects all its characteristics. Low temperatures, humidity, increased load - it must withstand all these factors.

Metal boxes are the most popular. This is especially true for duralumin products. They can withstand low temperatures, are strong and durable, and have an attractive appearance. However, this is the most expensive and rather heavy accessory.

In recent years, plastic boxes have gained a lot of fans. They attract buyers with their light weight and variety of colors, but cannot boast of strength and frost resistance.

The disadvantage of wooden and plywood charabancs is the fear of moisture. They need to be dried after each trip to the ice.

The upper part of the seat must be covered with moisture-resistant soft materials. Manufacturers use foam rubber or polyurethane foam for this. The entire body must be covered with a thermal insulation coating.

Properly planning the interior space is no less important than choosing external characteristics. The presence of separate compartments for each type of accessories will allow you to quickly select the necessary gear. Fish stored in a separate compartment will not permeate sandwiches with its smell, and a thermos in a specially designated compartment will not be damaged by rolling around the box. A small window on the side will allow you to throw your catch inside without getting up.

An additional advantage will be convenient access for cleaning the fish compartment. The bottom surface of the lid should also not be empty. It can accommodate many compartments for all kinds of small items. If the gear is tightly packed and does not move chaotically when walking, then it will never get tangled.

Characteristics of boxes from different manufacturers

There are many companies producing equipment for winter fishing. They produce a lot of all kinds of accessories, including drawers. They have different characteristics and features.

Rapala Products

The Finnish company was founded in 1936 by fisherman Lauri Rapala, famous for inventing the bladed wobbler. Today, the products of this manufacturer are also released under other trademarks owned by the company: VMC (hooks), Sufix (lines), Marttiini (knives), Storm, Blue Fox, Williamson, Luhr Jense.

The enterprises of this organization also produce charabancs, which have the following advantages:

Salmo Company

This fishing tackle manufacturer entered the market in 1991. The company was founded by Polish ichthyologists and avid fishermen Piotr Piskorski and Radoslaw Zavorski.

Fishing containers from this manufacturer have the following characteristics:

The dimensions of most models are 33.5 x 23.5 x 39, where 39 is the height.
The products are frost-resistant and immune to mechanical damage.
Slightly heavier in weight than the Rapala.
Universal carrying method. They can be carried either in the hands or on the back, like a backpack, for which there are special loops.

Brand Aquatech plastics

The Ukrainian company produces a wide range of plastic products, including plastic boxes for winter fishing:

They are inexpensive.
Various internal components.
Most models are tall, but weigh no more than 3 kilograms.
Straps with anti-slip lining.
Withstands weight up to 130 kg.

Company Teho

The boxes of the Finnish manufacturer of equipment and accessories for fishermen are distinguished by the following features:

Along the edges of the bottom there are serrated anti-slip sides that prevent movement in windy weather.
Many models have foam in the lid.
There is a window for placing the catch inside.

Fishing accessories "A-Elite"

This brand belongs to the Apiko-Fish trading house. This brand produces regular charabancs and boxes in the Comfort category. They are distinguished by:

Has a built-in thermometer.
Pull-out tray and hanging glass included.
Adjustable strap.
Four compartments for small gear.
Comfortable seat.

Homemade devices

It's easy to make a fishing box with your own hands. A variety of materials are suitable for this. Some unnecessary supplies will also come in handy. Homemade boxes for winter fishing are made from the following elements:

plastic;
foam;
metal;
wooden or plywood.

Foam or plywood product

This lightweight product is completely heat-resistant, and you will feel comfortable sitting on it even in severe frost. It is made of material with a thickness of 3 centimeters. The manufacturing process is simple and consists of the following steps:

This is the lightest winter fishing box.

The assembly of a charabanc from plywood or wood occurs in a similar way. The parts are attached with self-tapping screws, and it is possible to make a compartment for gear. The lid is insulated with foam plastic or other similar material. The entire surface is sanded to avoid injury to hands and impregnated with a water-repellent mixture. This charabanc is stronger than all the others, but also much heavier.

Express option - plastic canister

The fastest production method. It is necessary to cut off the top of the container and sand the edges. Along the perimeter, for rigidity, you need to secure a metal strip with rivets or screws. Next, you need to cut out a partition and a lid from plywood, which needs to be insulated and covered with leatherette. Secure everything in its place, hang a lock.

Old freezer

This is how fishing boxes were made in previous decades. This product lasts a long time and has good durability.. It's easy to make:

With such a charabanc you can go winter fishing for many years.

Whatever the fishing box is - homemade or purchased - fishing should be fun, regardless of the weather.

Attention, TODAY only!

A winter fishing enthusiast can be identified by a special box called a fishing box. As a rule, the fisherman drags it on himself, throwing the belt over his shoulder. This is a universal item that no fishing trip can do without. It performs several functions at once. Firstly, this is a box where you can put some of your fishing equipment, especially since there are only a few of them. Secondly, this is a container where the fisherman puts the caught fish. Thirdly, it is a comfortable winter chair, which makes winter fishing more comfortable. Naturally, you can buy a box in a store, but you can also make it yourself, especially since it is not difficult.

To make your own box, follow these steps:

Make preliminary “sketches” on paper to determine its appearance, its design and material of manufacture.
At this stage, it is better to make a drawing, otherwise the item will be difficult to manufacture without knowing its actual dimensions.
Development of the stages of its manufacture in order to determine the sequence of assembly operations.
Assembling the box and checking it for quality, as well as for compliance with the declared dimensions and appearance.

Almost everyone took school courses in descriptive geometry, therefore, we can safely say that even a schoolboy can draw a drawing, especially since the drawing of a box is a drawing of a rather primitive object.

The task of creating a drawing is to ensure that during the manufacture of a product it is clear which parts have what shape and size. In addition, the drawing indicates which parts are connected to which and in what sequence. As a result, you should get what is drawn and nothing else. Without drawings it will be much more difficult if there is no spatial thinking and exceptional memory. Not every person will be able to draw a fishing box in memory, and then “extract” everything from the same memory by details, and then make similar parts in reality.

There are three options for making a working drawing:

On the computer. Nowadays, a computer can be found in any family, so drawing a drawing is not difficult. If you have no personal experience with a computer, you can turn to family members, especially school-age children, for help. It is enough to install the appropriate program on your computer and the drawing will not take long to appear. The only thing left is to print it on a printer. This is the easiest way to make high-quality drawings, where everything will be absolutely clear.
Draw on graph paper. This is also a simple option, but in this case you need to have personal drawing skills. Graph paper allows you to effortlessly calculate everything down to the millimeter, that is, determine the height, length and width. Drawings on graph paper are also high-quality and visual.
An ordinary primitive sketch on plain paper or on squared paper from a student’s notebook. As a rule, the sketch is not distinguished by its quality and beauty, but the basic data is necessarily present on it: length, height and width.

Material selection

A fishing box can be made from any available material, including wooden planks. The main thing is that it is durable and light. Not everyone can make it out of metal, and you will need more serious tools.

The type of wood does not play a special role, but no one will make a box from oak, since the resulting product, although durable, will be quite heavy. The box will be heavy if it is made from chipboard. In addition, it is difficult to drive nails into chipboard. The most suitable material is pine. But here it is very important to choose such boards that there are no knots. It is also difficult to hammer nails into places where there are knots.

Required Tools

To work you will need the following tools:

To begin with, it is better to decide on a place to work. You may need a table that will have to be covered with oilcloth or papers, since glue and varnish will be used in the process.
Here you should stock up on a screwdriver, hammer, pliers, ruler, nails, as well as a level that will help you make the box correctly.
Personal protective equipment, such as a respirator and gloves, will not be superfluous.

If everything is prepared, then you can safely proceed to the manufacture of a fishing box.

Step-by-step assembly instructions

Assembly of the box begins when all the necessary parts are prepared.

They start by assembling the frame. For greater quality and strength, you can use glue and nails, although you can get by with one. They do it as follows: the boards are smeared with glue, after which they are knocked down with nails. Nails act as a press, which will allow you to get a high-quality adhesive connection. After the frame is assembled, begin attaching the lid. The design of the cover must be thought out at the stage of designing and drawing drawings.
The lid can be removable or hinged. In any case, you will have to make sure that the lid fits tightly. It can be upholstered on the inside with fabric. In order for the lid to hold firmly on the box, you need to come up with a special latch that, when closed, could pull the lid tightly to the frame.
Some anglers use a box instead of a chair, so the top of the lid is upholstered with durable material (leather) along with insulation.

After that, they begin to divide the inside of the box into a compartment for fish and gear. The following option is possible: the tackle compartment is equipped on the lid. It turns out, as it were, one box in another, like a nesting doll.

Finally, they begin to decorate the box. Since it is made of wood, it must be coated with a water-repellent varnish, otherwise the wood will instantly absorb moisture. In addition, wood also absorbs odors. If you don't cover it with varnish, the box will always smell like fish.

In this regard, it should be said that both the outside and the inside of the box will have to be varnished. At the same time, you need to make sure that there are no gaps. The product is coated at least 2 times. The varnish chosen is not smelly, otherwise the fish will always give off the aroma of the varnish surface.

Secrets of quality work

Most people are sure that the one who makes exclusive things knows some secret. Making a good, high-quality fishing box is quite simple and you don’t need to know any secrets. The secret is to carry out the work strictly according to plan and strictly according to the drawings, where all dimensions are clearly indicated. If the product does not work out, then most likely there is an error somewhere in the drawings.

Buying a box at a fishing store

To make a fishing box yourself, it is not enough to have wooden blanks and tools, you must have desire, your own interest and a certain level of imagination. Most anglers do it because it's fun. In addition, this saves money in the family budget, where there is not always money left for a fishing box, which is so necessary.

But there is another category of fishermen who are not interested in sawing, planing and hammering nails, and subsequently inhaling the aroma of water-repellent varnish. In addition, they always have additional funds to purchase it at a fishing store. Therefore, they simply go to the store and buy, especially since the stores have a choice. Here you can buy fishing boxes from the PLANO company, at prices ranging from 3 thousand to 20 thousand rubles, as well as boxes from Nautilus. In addition to them, you can purchase products from the manufacturer Flambeau here.

In other words, in fishing stores you can buy boxes at any price, so we can say that they are available for all categories of anglers.

Do-it-yourself hook for winter fishing

We continue the section on fishing tricks and homemade products for winter fishing:

Probably every beginner in winter fishing is faced with the question: what to go fishing with, and so as not to look worse than his other fellow fishermen. We won’t talk about equipment and various fishing rods and the like here, that’s a different topic.

What I found turned out to be an old refrigerator from the Minsk Refrigerator Plant, and it had not been working for a very long time, although everything made in the former USSR works for a very long time and persistently.

To begin with, I cut off the pipe through which the freon flowed and riveted it. Otherwise, freon would leak out with an unpleasant odor. After this, remove the lower one, i.e. the back wall of the chamber is obtained (by lightly tapping with a mallet it can be easily removed). Next, I took 10 mm plywood, covered with plastic on both sides (Fig. 3) (previously it was a box from some old TV). Of course, it was possible to use ordinary plywood, having previously coated it several times with drying oil or NC varnish, but I had nowhere to put it).

Using a regular pencil, we outline the inner perimeter of the chamber and cut it out with a jigsaw. In my case, the back wall made of tin was not the entire size of the chamber, and besides, there were holes in it, so I decided to cut a sheet of aluminum exactly the same size as plywood with rounded corners. And for better protection from water and aesthetics (no one has yet canceled it), I also cut and bent a standing seam from an aluminum plate along the length of the chamber, but did not rivet it (Fig. 14). After we have prepared the sawn plywood, a sheet with rounded corners and a fold, we begin to assemble our box. First we lay the plywood, then we put a fold on one of the uncovered sides, our pre-cut sheet of aluminum and the entire back side. But I want to warn you that we don’t clamp or rivet the folds here, but leave them the same as they were, we just push them tightly, and to be convincing, you can push them harder a couple of times using light blows of the mallet.

After this, we take a marker or pencil, as you like, and mark the centers of the holes on the folds with the camera box along the perimeter. Using a drill D=3 mm, we drill holes along the pre-marked marks. I got 12 holes around the entire perimeter (Fig. 13). Here we can now secure, but not completely, our bottom of the box.

Now let's move on to the seat. Here I already took 10mm plywood, kept the dimensions so that there would be approximately 5-8mm left on each side at the edges and 10mm wider than the width of the chamber itself, and sawed out the seat with right angles. This was foreseen in advance so that the next time we finished the seat it would be more convenient and easier for us to do it, i.e. lay paralon and line it with leatherette. Lubricate with drying oil or varnish and let dry. On the side where we have a hole left for the pipe, and in my case I made it with the back side of my box, using inexpensive curtains purchased in advance, mark the holes with a marker, use a core punch and drill 4 holes (Fig. 10, 11) (according to the number of holes on two curtains). After we have secured the curtains, we mark the centers of the holes on the plywood seat and also drill holes.

It would be possible to stop here, putting everything together, but the soul requires beauty and convenience. And spontaneously, and there’s no other way to call it, a bright idea came to my mind to create a tray for a fishing rod (Fig. 4, 5, 9), because by simply throwing it in a box we risk breaking it with the things we need for every fishing trip: a slotted spoon for removing ice from the hole, a thermos (by the way, it fit in mine, thanks to the spacious chamber), etc.

And I couldn’t think of anything better, from the same sheet of aluminum that I had left, I drew out a development of the pencil case tray, and having drilled holes on the edges, I screwed it on the inside of the seat, having also drilled holes in advance. Now let's start finishing the seat (Fig. 1,2). After some grandiose purchase of furniture, like every “plushkin”, I was left with a thin paralon, 1 cm thick. Having cut out 4 pieces of paralon to the size of the plywood seat, we stack one on top of the other. Having cut off a piece of leatherette, on each side 4-6 centimeters larger than the plywood and using a blade to cut holes for the curtains (Fig. 10), which are already permanently screwed to the seat, and having greased the plywood with any rubber glue on the inside, carefully glue the leatherette onto it ( Of course, it would be possible to connect using a stapler).

Rubber glue glues leatherette to plywood well. But if we try to sit on the seat, we will hear the air coming out of it, and when we get up, we will hear the air coming back in. To eliminate this, you need to thoroughly lubricate the corners and holes where the curtains are with glue and glue them tightly, and stitch the corners themselves where the leatherette joins with threads, also to reduce hissing. That's it, the seat is ready.

But we don’t need such a wide box with one compartment, so we divide it with the remains of a piece of aluminum into 2 parts in the proportion of 2/3 (Fig. 3, 11, 17), having thought in advance that we have a tray on the seat and therefore a wall for We make the compartments a couple of centimeters lower from the tray, taking into account the fact that to attach the wall to the box you need to leave 1-1.5 cm at the edges (Fig. 12), we bend these edges. And having drilled 2 holes on each side of the drawer and the wall, we screw it on.

To carry the box, we will need a seat belt from any car (Fig. 1) or even a leather belt from an old raincoat (Fig. 16).

But in order to attach it to the box, we make 2 ears from millimeter-sized duralumin (Fig. 7). In pre-drilled boxes on both sides, we attach them with bolts to the box itself. I would like to note that my entire box is assembled with three-piece bolts (the total number of bolts is approximately 30-36 pieces). So, in order to connect the belt and ears, I needed 2 carabiners with wide slots for the belt. You can take them from an old hiking bag.

In general, we could have stopped there, but on ice I want to surprise my colleagues with something, and I came up with the idea of covering the entire body of the box with dark pink leatherette (Fig. 1). To do this, I took a large piece of leatherette and wrapped it around the box, cut it off, then manually, and then stitched it on a sewing machine (Fig. 2). And it turned out like a bottomless bag. Having disconnected the bottom of the box and smeared the edges of the leatherette and the bottom of the box with rubber glue, gluing everything, bending the edge of the leatherette inward and squeezing tightly (Fig. 8, 14), put the bottom back on and now finally connected everything with bolts (Fig. 15).

I also removed the ears for the belt so that they wouldn’t interfere when I pulled the leatherette up, having lubricated it in advance and pressed it tightly for a couple of hours on the top edge of the box. I compressed it using ordinary paper clips, it could have been done with clothespins. After the glue has dried, screw on the ears and seat. As shown in the second version of the box (Fig. 16), you can draw or cut out the capital letters of the first and last name from the remaining piece of leatherette, and there will be a personalized box. Before I had assembled the entire box, I coated the bottom with sealant along the inner perimeter.

Photo:

For lovers of winter fishing, the most important element of equipment is a fishing box.

It should contain not only spare parts for them, but also various auxiliary tools and catch.

Introduction

Winter fishermen stand out from ordinary citizens in the city not only because of their warm clothes, but also because of the unusual accessories they carry on their shoulders. One of these interesting ones is the fishing box.

Today, in specialized stores you can easily purchase light and roomy models made of durable plastic. They are convenient for fishing and for transportation; inside there are many sections for separate storage of gear, additional accessories and caught prey.

However, most ice fishing enthusiasts still appear on reservoirs with homemade boxes.

Why do fishermen make homemade boxes?

Old winter boxes can be found on the shoulders of not only the poor category of fishermen, but also fairly wealthy citizens. Why won’t these accessories give way to store-bought counterparts?

Several reasons come to mind, which is why unsightly homemade products remain in demand among fishermen.

Some winter enthusiasts are not satisfied with industrial designs. People come up with their own designs that can satisfy their requirements.
Many fishermen live far from large populated areas and do not have the opportunity to buy a modern model.
Someone is trying to save money on a fishing box by creating a container for themselves from scrap materials.
Many people love to tinker; the process itself and the results of the work bring them real pleasure.

But whatever goals the fisherman pursues when making a winter box with his own hands, it is important that it turns out to be multifunctional, spacious and durable. If these conditions are met, such a product will be a real assistant when fishing.

Plywood winter box

At first glance, plywood is not the most suitable raw material for making a fishing box. The material is quite heavy, but the main disadvantage of wood products lies in its susceptibility to moisture. However, with appropriate treatment with paints and varnishes, the main disadvantage of a plywood box can be eliminated.

The technology for making a wood model is quite simple. The fisherman will need a sheet of plywood 6-8 mm thick, a jigsaw, a screwdriver, wooden blocks with a cross-section of 30x30 mm, wood screws 25-30 mm long, furniture hinges, a piece of foam rubber or dense foam plastic, waterproof fabric, and an old belt.

The instructions for making a fishing box from plywood are as follows:

Fishing box from freezer

A lighter and more durable homemade box for winter fishing is a refrigerator container. Finding an old freezer won't be difficult. Moreover, freezers of different sizes were used in different refrigeration units, so you can make two boxes.

I use a small sample for short fishing using jig rods or spoons, and I take a large analogue with me for fishing with jigs. It holds not only tackle and fishing accessories, but also a sufficient amount of food and a thermos with a hot drink.

Ephemera box

If someone didn’t have time to make a good box or couldn’t buy it in a store, you shouldn’t cancel your fishing trip because of this.

Perhaps in the pantry, basement, shed or garage there is a rectangular plastic bucket of construction paint or primer. It can make a good box for 1-2 uses. It is enough to modify the plastic container a little, and it will happily accept fishing gear.

First of all, it is advisable to strengthen the lid of the bucket by gluing plywood to it. You can make a foam seat on top, covering it with at least plastic film.
Inside the box it will not be difficult to divide the entire volume using a partition. It can be made from plywood, plexiglass or plastic. It is best to attach the partition with adhesive.
The belt should also be glued to the side walls so as not to disrupt the integrity of the structure.

The main disadvantage of such a box is the fragility of the plastic in the cold. One careless movement can render it unusable.

A winter box is an essential attribute for ice fishing enthusiasts.

Each fisherman creates an idea of the box based on his own experience, as well as the models he liked from his fellow hobbyists. Let these be store-bought products or your own designs. The main thing is that the box can accommodate all the fisherman’s wealth and cope with the weight of its owner.

Useful video

Video about how you can make a winter fishing box with your own hands:

Video about a homemade winter fishing box made of aluminum:

When fishing, a man should have everything at hand, especially in winter, and for this you simply cannot do without such an attribute as a container for winter fishing. This is simply an ideal place to store all the items necessary for ice fishing.

In addition, a chest can be used instead of a chair, because sitting on a specially equipped place is much more pleasant than on a tiny piece of foam or a flimsy bucket. After all, the most important thing when fishing in winter is the ability to sit for a long time waiting for the coveted catch.

Types of fishing boxes

A fishing box for winter fishing is made from a variety of materials that have different characteristics, price criteria, and interior design. There are such fishing boxes:

Fishing chest without compartments;
A box with a designated place for a thermos;
A box with a container for gear equipped inside;
Containers with boxes intended for baits;
A box with equipped trays for placing baits and attachments;
A box with a specially designated place for the catch;
A chest with overhead external compartments in which fishing rods are placed.

These different configurations of caskets are specially designed for each client depending on his needs. The box for winter fishing is made in Ukraine, Russia and other CIS countries.

Materials for making boxes

A fishing chest for winter fishing is usually made from materials such as:

Plastic;
Metal;
Styrofoam.

The thickness of the product greatly affects the quality of the chest; it is not uncommon that foam plastic lasts much longer than metal. This is due to the fact that there are soft metal alloys and a box made from them will not last for a long time.

Every year, additions to the packaging configuration are created, especially among them the following stand out:

Covers for containers with straps for easy carrying on the shoulders;
Skis for fishing boxes, they are attached to the body from below and greatly facilitate movement to the fishing spot, across the snowy expanses.

Homemade boxes

But, despite the huge selection of such boxes in stores, many fishermen prefer to create a box for winter fishing with their own hands. In this case, most often they create a box for winter fishing from foam plastic.

A fishing chest you create yourself will be more convenient to use due to the fact that all compartments can be arranged depending on what is convenient for you. In most cases, when creating a box, the choice falls on polystyrene foam due to its following properties:

Resistant to wet temperatures and completely waterproof;
Light weight and high density.

If during winter fishing something goes wrong and the ice disappears from under your feet, such a chest will serve well as a life raft. To assemble such a device you will need the thickest foam you can find. Next, you need to equip the compartments; as a rule, about 5 compartments are equipped inside the box. The largest compartment is reserved for catch.

There is a compartment (pencilcase) installed right under the lid on top; fishing rods are usually stored in it. Also, don’t forget about the compartment for food supplies and a thermos with hot tea to keep you warm. You can look up how to make a box for winter fishing on the Internet or rely on your knowledge and imagination.

After the casket has been glued together and all the compartments have been equipped, you can begin painting it a different color. Since polystyrene foam is mostly found in white, it would be extremely impractical to keep it in the same color tones. Since he can get lost very easily in the white snow.

Next, you should equip the styrofoam chest with a comfortable handle for carrying, but it is better to opt for straps, as it will be more convenient to move and your hands will get less tired. Other materials used in making homemade boxes
You can also make a box for winter fishing with your own hands from materials such as:

Plywood, this type of construction is quite widely used. The only downside is that it requires modifications in terms of insulation. In addition, the plywood should be carefully processed, since there is a risk of driving in a splinter during operation. What is important is that such a casket will be very strong and durable, but, unfortunately, you will definitely have to put it on skis, because it is extremely difficult to carry around.

Plastic canister. It also requires insulation of the compartments to prevent food from freezing. In order for containers made of such material to last longer, it is necessary to select the thickest plastic possible.

A box from the freezer compartment of a Soviet refrigerator. This is a kind of hit among fishermen's caskets. Because it is extremely light, very durable, and, of course, will last a long time.
A box from a computer case. As a rule, this material is used by younger anglers.

Here, so to speak, whoever likes it best will be used in this difficult task of design. In addition, due to the constant rise in prices for fishing equipment, a homemade chest for winter fishing is becoming increasingly popular.

Selection of a box for winter fishing in a store

A winter fishing box is a very popular product. And due to the wide range of these products, it is difficult for a novice fisherman to make a choice. In this case, it is best to consult with knowledgeable people; sales consultants in the store will be happy to help and tell you everything.

And also, if any, advanced innovations have appeared, they will offer you to look at. After all, as has long been known, everything new always makes our life easier in some way, and the fishing process will become even more exciting and interesting.

But in any case, the main thing in a fishing chest is the compartments for possible devices for fishing, fishing rods, food and a thermos. You see, it’s more convenient when everything you need is in one place.

Thanks to this box, there is no need to carry bags and packages with you when going fishing, and where exactly you get the box - whether you make it or buy it - is no longer so important.