How to make the spinner himself

Most of the homemade production of homemade glitters, both rotating and fluctuating, are engaged in rural fishermen due to unavailability or remoteness of fishing stores. In cities, despite the presence of a wide choice of fishing bait in retail chains, did not affect the fishermen to abandon their independent manufacture. The main reasons for are - high cost, the desire to make something unique, frequent losses due to hooks, disruptions with large fish, etc. And now about andwhat and how To do self good blind.

We make glossy homemade

In the time of restructuring, when I started making the first homemade glitter, there was little on the sale of good bait. And now, among many models it is difficult to choose the gloss, which catches, and does not disperse the predatory fish. Poor, the fact that all the factory bait is made to the same type according to standards, and in each reservoir, fish living there their individual features, which makes it impossible to provide for these conditions. This statement is fair for all types of bait, and not just for glitter. I made this conclusion on fishing when I changed the petals of rotating brilliantly on homemade.

In the housework of petals for the turntables, as a rule, there are no accurate press of forms or stamps, and make We are "on the knee", so they are obtained with different bulges of form, and their weight is different from the standard, since the material is selected in the thickness of the eye. And just such selfieckers brillose With non-standard quality may be the most catchy. Manufacturers of homemade bait are the fishermen themselves, and for them the main thing is not a beauty, but the catchness of their crafts.

Rotating, including homemade Brillons (they are also turntables, rotational) Many fishermen are most preferable, in addition to the predatory fish, they can catch bleak, roach, ias, bream. Their weight can be from a halfgraum to 20 grams. And it is not necessary for catching a large fish to use glitters of large sizes, very often it is precisely small trophies that are caught. The reason for this is that the predator attracts the vibrations of the bait at the time of the wiring, and not the size.

Rotating glitters are with several locations of Loading - in front, in the center, rear. The greatest application found spinning brilliants with front Loading - adverted turntables, On these flames, the cargo is made in the form of a load - a head resembling a small fish. These brilliants have dignity, in the form of the ability to develop during flight, thus contributing to increase the cast range.

In addition, the cargo is an asymmetric form, thanks to this property, overwhelming the fishing line for the tee and swing it during the wiring. Another feature of the front-loaded turntable - it starts the rotational movement immediately as soon as it turns out in the water. As we see brilliance in your own, it is unique, but to make it a catch, it will be necessary to equally understand its composition. Each piece of glossies depends on its game and frequency of oscillation. The composition of brilliance with the front location of the cargo: a cargo-head on a stainless steel wire, a central axis, a clamp, petal, a Cambridge, a bead and a tee.

How the cargo is made - the head of the brilliance with the front Loading

Cargo - the head is better casting immediately with a leash. The shape for casting must be done with the lack of symmetry, but with the mandatory thickening of the rear. The front part of the cargo - the heads should be pointed. Lower cargo - heads made from steel stainless wire 6 - 8 cm long. The leash in this case is not normal, in its back, using the round-rolls, we make a loop for fastening the rest of the glitter.

The diameter of the wire for a leash is 0.5 - 0.6 mm, it makes gloss more catch, since it is thicker than 0.8 - 1.0 mm in the factory brilliance, as a result of which the leash is hard and not bend, but at the same time it tries to break out of the mouth, increasing the likelihood of assemblies. And the fact that bends when the fish is bought, it is a trifle that is easily corrected by fingers. Changing the size of the form you can cast heads with different weights.

How to make the petal of the turntable

The main work among all the details of the brilliance of the turntable gets the petal, it is he who rotates around the axis makes hesitation of encouraging pike, perch, pikepes and other fish feeding on fish, take gloss for a real fish and grab it. Back in Soviet times, my friend gave me a somewhat glitter "MEPS", which he brought from GDR, where he passed the urgent service in HSVH. In the Soviet Union, such glites were not yet impossible to purchase, so I decided to try to make them copies, it was sorry for such brilliance to lose with hysteries or when retrounding large trophy fish.

To make a steel stamp for giving a petal form, it was necessary to pretten to spend money, it's most expensive this pleasure, and you can only make it in the factory. Therefore, I decided to apply easier and cheap methods for the manufacture of petals. As a result of samples and errors began to be obtained, let not completely accurate copies of "MEPS", but very similar petals. With the help of a flattened tube, the edge of which describes the shape of the petal and a piece of rubber, can be given the form of petals for the manufacture of enough catchy glit.

Flusted tube for the manufacture of petals of spinning brilliance

To make a petal of the turntable, a plate of copper or brass with a thickness of a thickness of 5 mm falls on a piece of 5 mm (it is possible other alloys of non-ferrous metals), then you take a flexible tube and a hammer blow to the upper end getting blanks. Before you hit the hammer on the tube, you need to insert a fungus from steel or something to put something, otherwise the edges of the tube will quickly bend. Then the billet of the petal is drilled, the jumpers are snacking the rake and we are calculated. Drill the hole and polish on all sides. All petal ready. You can try to make a punch from the balls of the bearing, only for this will have to pull it for a long time and accurately.

Homemade Petals Made with a Spleasing Tube and Rubber

Homemade chomoth flashes

The petal is made, now it remains to attach it to the axis, for this you need a clamp. You can collect glitter without it, though the rotation of the petal will be worse. You can not make it, but to remove it with a bad brilliance or try to buy. To make a homemade chomotic need a thin brass plate from which narrow from 1 to 1.5 mm is cut down, on the sides of which they are done along the hole, remove burrs, give a semicircular shape or shape of the bracket, the chomoth is ready.

The clamp can be made from the wire in the way of winding the edges on the wire slightly exceeding the diameter of the brilliance axis to provide the gap. From the shape of the clamp affects the rotation of the petal. By changing his form it is possible to have two versions of the petal on one bright. For example, the semicircular shape causes the petal to rotate more often and in the proximity of the axis, the triangular on the contrary is on and slow.

What a tee or hook is better?

Tees or hooks must be a good quality, the majority of spinningists think so, but it is worth thinking. After all, if you are fishing being on the shore and accidentally hooked gloss, for something, for this case there will be a bad quality hook, which will warm up or breaking. Therefore, the quality is not always appropriate, and even if the brilliance or another bait is expensive. Rybach from a boat The tap brilliance can be considered a trifle, if there is a checkpie. Depending on the foregoing, it is worth making a decision, what a tee, the hook for spinning is better to install when it is assembling. They will not interfere with the arsenal of fisherman and those and other assembly options, you can proceed easier, eat enough snacks and they will be removable.

We collect homemade flashes

Details are ready, now we collect homemade front-loaded gloss vertushushka. Initially, the central axis should be made. The assembly of the details of the brilliance on the central axis is carried out in the following sequence: a tee, a Cambrick, Bead, petal on the homutics. Make the length of the axis on 2 - 3 mm long petal, and the tee should not hide them. After planting a tee to the bottom loop, the lower tip is spinning and a red-colored cambridge is coming. From above it is put on a bead as a rolling bearing for the bottom of the clamp. After the nozzle, the clamps with the petal make the loop, which connects the loop load - heads. All brilliance is ready.