What are the floats for fishing better use better?

The main feature of the crucian - this is his cautionb Knowing about such a nature of this fish should be selected by the appropriate tackle. In this article, we will pay special attention to the float, as a sensitive tolerance signaling.

Sensitivity is the main characteristic of such floats. As soon as the fish touch the bait it should be seen by the movement of the float. The bunch of the float can signal differently - either fall or climb (in cases where Karas takes off the bait from the bottom).

Factors influence the sensitivity of the float:

• Load capacity float (A big sensitivity is characteristic of less lifting floors. But the MULOSHROPOPOPED Floats has one significant minus - they are difficult to throw them away and catch them at the depths are inconvenient. Therefore, think at what distance from the coast you want to catch and find the best balance);
• Cross-section cross section Float (Float will be more sensitive with a thinner tip);
• Cross section of the main part of the float (and again the big sensitivity is characterized by more subtle, elongated floors).

What should be the float for catching a crucian?

If you summarize, the optimal float on the crucian must comply with this:

• not barrel, and vertical stretch
• have a thin tip
• should not be very bulky

So the optimal will be elongated in the length of the float with a narrow tip. The best option will be a vertex of more than three centimeters.

Proper Loading Float on Casia

Now let's talk about the important part of the installation of the float - it is for Loading. For catching crucian, the float will be considered a float in which only his tip is visible above the water. If you configure your gear in this way, the fishing process itself will bring much more positive emotions.

As already mentioned, Karas - Fish Careful, if not even say delicate. It is with such delicacy that you need to approach the fireload.

Two types of Loading found their use in modern gear:

• Distributed. In this case, all weights are distributed evenly. Suitable for standing water, flow, fishing at depths. Careful and sensitive fish can be caught in this way. Another plus of such a lifestyle - the bait can be smoothly delivered to the desired depth. Such a Load can be called universal.
• Concentrated. Instead of distributed over the entire length of the snap, the weights are closer to the hook. The place of application of such transpension is: heavy snaps with active cool, as well as when fishing at depth. This Loading can also be applied to capture careful

In order to properly produce the fireload, it is necessary to choose the weights and arrange them in such a way as to ensure the maximum sensitivity of the float when biting.

To produce Load at home you need:

• Find a suitable capacity (can be suitable bucket, bathroom, barrel or any other capacitance in which you could conduct an experiment)
• Dial water Found capacity
• Secure the weights On the fishing line
• Lower this workpiece in water
• Purify float (The correct Loading is achieved when the bunch of the float is on the surface, and its body is completely immersed in water)
• Now you need to drown a float several times. For this you do not need to apply a lot of effort. The well-cooked float should be clearly held to take a primitive position (if efforts are needed to immerse the float completely - it means you need to add a few crushes, increasing the sensitivity. And if you need to see it very much, then it will be difficult to see bite on such a tackle. So you need to see such a gear Web care.
• The last step is the choice of subpask. This is the most recent Georgic, which is necessary to register a bite. The optimal subpaste weight should ensure the rise of the float, as soon as it is raised himself. But at the same time, too much pockets can scare off cautious fish.
• When all sore selected It will only remain fixing them on the fishing line.

Pay attention to how to choose the optimal float, given the weather conditions.

The best floats for catching crucia - weather review

Consider three basic weather conditions that can become decisive when choosing the technical characteristics of the float.

Among them:

• calm water in mad weather;
• standing water in windy weather;
• pacific.

Calm water in windless weather

Such conditions are asked the use of such floats as:

• goose feather

Better float than an old good goose feather is difficult to find. By the way, such a float consider purely "karasin" and still actively use fishermen.

Such floats have the greatest sensitivity, among all the most diverse forms of floats.

Watching such a float, it is not possible to determine not only when a crucian will take a final decision to get a delicious bait, but also to notice the moment when it will start it to try and thinking whether he should be touched by this provision.

Thin feathers are good for catching crucian as they are equally sensitive to different "karasin" bite, whether it is a deep bone (his full flooding), lifting the bait (when the crucian is tossing the bait of the soil and rises with it) or the removal to the side (when The float begins to "lead" to the side and gradually flooded).

In addition, the weight of the feather float does not feel for the crucian and with all his caution, he does not notice it.

But now it can be difficult to find a goose pen, but this is not necessarily, since there are many similar professional and semi-professional floats like a needle.

Calm water in windy weather

As soon as the wind rises, it seems that quiet calm fishing is doomed. Ryabb is formed on the surface of the water, and in such cases the goose feather and the needle is already unrealistic. The wind pins them on the side, and the floats themselves begin to jump on the waves. But this does not mean Karaz stops to peck.

With goose floats, you can notice bumps only if the fish will drag the hook to the bottom, and knowing the crucian - he will not do that. So it's time for changing the float.

Although narrow floats are most sensitiveWhen waves appear, they are useless. So you have to sacrifice sensitivity, for the sake of stability. The best option for windy weather will be a float with a long pen, barrel body and a small antenna.

Such a tip, which sticks out of the water, can easily cut the turntable surface of the water. A body immersed in water will not respond to the wave and remain calm even into strong excitement. And at the same time it will be possible to easily determine any kind of bite.

Pacific

Why are we talking only about the quiet current? Because with an average, and even more so strong the flow of crucian, and his catch is very and very rare. But the weak current is not a hindrance. Only again you have to change the float.

How to catch more fish?

I have already spent active fishing for a long time and found many ways to improve Klevel. And here are the most effective:

1. . Attracts fish in cold and warm water with the help of pheromones, which are part of the composition and stimulates its appetite. Sorry Rosprirodnadzor Wants to introduce a ban on its sale.
2. More sensitive tackle. About the Bzora and Instructions for other types of tabs you can find on the pages of my site.
3. Baits using Pheromones.

You can get the rest of the secrets of successful fishing free by reading the other materials on the site.

Float for the flow should distinguish increased lifting capacity. There are two reasons for it:

1. To obtain the best stability of the keel of such a float, it is reduced by an additionally crushing.
2. The overall back of the fishing line should be increased to such an extent so that it can resist the flow.

Such a float must be attached to the fishing line at least two points. The stability of the float will thus enhanced. Of course, this can not not affect sensitivity, naturally for the worse. However, if you concentrately watch the float, it will be not difficult to see bumps.

Homemade floats for catching crucian

Production of floats, pleasing for crucian, it is not difficult. There are many options, some of which we will look at. Homemade floats often can even work betterSince sharpened under certain features of the reservoir, which are known to fisherman. In addition, it is like a fisherman class.

Floats "Gusinka"

We have already paid some attention to this type of floats. If you have the opportunity to get a goose feather, then the case will be less. It is necessary to clean the pen stem from the whole. Then paint the feather varnish. Well fit female nail polish bright red.

You can use the top insulation as a fixators of the fishing PVC wire. And in the kil float, screw the thin wire and make an eye from it to skip the fishing line. Here is the float and ready!

But if the goose feather is difficult to find, ultralight and thin floats, analogs of the goose pen can be made of other materials. For example, the beverage tube is suitable. Its lightweight material and hollowness will ensure unprecedented ease.

It will only be left to buy straw straw from below and from above. They can also be made from lightweight material - foam. Do not forget about wire ring at the bottom and rubber band for fixing the fishing line. Here, the production of the float is completed.

Foamed floats

The main material for the production of float data is a construction, mounting foam, which is used to close the gaps. It is ultralight and is also not susceptible to decomposition in water. From the foam can be made like the body float and the entire float.

For example, you can take the already mentioned hollow body for the felt-meter, lubricate it from the inside by oil, and blew the foam there. When it dries the finished float can be removed from such a mini-matrix.

Floats "Olive"

To make the olive form float, we will need one of these materials:

• styrofoam
• cork from wine

If the foam is used, you must first make a blank. A rectangle cut out of the foam sheet. At the same time, it should be slightly larger than the necessary olive diameter. Then, with the help of a stationery knife, we give the workpiece like a rounded form. From the plugs also make the necessary form.

As an antenna, you can use a feather pigeon, toothpick, or a handle rod. It should be noted that the feather will be easiest. All this with glue is attached to the workpiece.

Among the main flaws of flood floats can be called an excessive porosity of the material. In addition, such floats are not very durable. But if you open the float with epoxy glue or thin layer of paint, then you can cope with this problem.

As soon as it dries, a thin peel is formed on the float that does not allow water to penetrate into the pores. The more layers put the stronger the crust. Each of the layers need to dry for 6 hours. And on the last layer will take about a day. The dried layer then shook the sandpaper.

Attach such a float to the fishing line in several ways, depending on the structure of the float:

• Make it with a sliding, if you skip the line through the body float (the float is true then it will be impossible to remove without breaking the whole tackle).
• The fishing line should be attached with rubber bands to the upper and lower part of the float. Then it will be easier to replace it.

Float from a medical syringe

Instead, the needle put an antenna. From the piston you need to cut off the Pipka, and instead, to mount the ring for the fishing ring. The lifting capacity of such a float is even higher than necessary for catching crucian. But its carrying capacity can be adjusted. Since the syringe is hollow inside, it is possible to dial water and increase its weight.

So it will become more suitable for long-range casts. Sensitivity can be adjusted by increasing body length float. It is enough to pull the piston of the syringe and the float will acquire additional sensitive properties.

Sliding float for fishing crucian

It is worth remembering that the sliding floats have high lifting capacity and low sensitivity. However, some types of sliding floats, most sensitive among them can be used to mount tackle for long-range cast.

The main types of sliding floats are:

• in which the fishing line is passed through the body of the float, through the central hole;
• which are attached to the fishing line with two ears;
• which has one ear and with it is made fasteners.

Where to catch a crucian on the float?

Due to their survivability and unpretentiousness to the living conditions of Karasi are common in almost all reservoirs. Crup refers to the fish that are constantly moving along the water during the day, because hiding from the heat. That is why the best place for catching the place that are little warmed.

These include a shady coastline, thick coastal vegetation. In such places, you can count on boring crucia to the sunset. In addition, it is worthwhile that in the blooming water a crucian not catch, because it avoids places where there is not enough oxygen.

It spawns crucian once a year - in the late spring, before and after spawning, the crucian begins the active JOR.

The choice of float can play a decisive role when catching a crucian, given it accuracy when biting. The best option will be thin long, perverse float having high sensitivity.

However, the weather can make their adjustments and will have to sacrifice sensitivity and choose greater stability. In addition, to make the float for crucia is not so difficult.

Now he pecks only!

This pike caught using the Kleva activator. More fishing without catching and searching for excuses to your bad luck! It is time to change everything !!! Best Kleva Activator! Made in Italy...