Trashing on the ring: Tackle, search for fishing, bait and bait

Catching bream on a ring or washer is common among the fishermen of the lower Volga. This tackle is very catchy, especially well she showed themselves when fishing white fish for the flow. For the burden you will need a boat with 2 anchors, a grid for bait and the tackle itself.

Tackle for catching bream on the ring

Before fishing, the boat argues at two points and the feeder is lowered with a bait on a line with a thickness of 1 mm.

Fishing rod For catching the ring is quite simple and affordable. The rod is required short, its length should not exceed 0.7 m.

It is equipped with any coil With the stock of the fishing line 15-20 m thick in 0.45-0.5 mm. For leashes, a fishing line is 0.25-0.3 mm.

Distance between hooks about 0.5 m.

Ring It is made of lead, it is round in cross section and rented in the form of a ring. The ends of it are cut at an angle of 45 degrees. When the ring is rolled, the ends are tightly adjacent to each other and closed the snap. On the opposite side of the lock in the ring there is a hole with a diameter of 2-3 mm. In this hole skipped the fishing line, at the end of which there is a wrestler. It is tied to another piece of fishing line with leashes.

The ring is put on a thick fishing line that holds the feeder at the bottom. The equipment smoothly descends to the depth. When she comes to the feeder, the fishing line will stop soothing. And the lobe with leashes can be lowered further, removing the hooks from the feeder.

Hooks Single with long priests are applied to make it easier to extract them out of fish. Hook size It is selected under the bait and the estimated size of the fish.

As alarm Pokleki apply to nods with a bell. Some fishermen prefer to keep the fishing line on the finger to feel the touch of fish to the bait.

Correct bait and feeding process

For bream feeding, a large grid with a cell is 5 × 5 mm. You can adapt ordinary vegetable meshes by making the rope string to which the fishing line is tied.

The weight of the weight of 1 kg is sent to the bottom of the feeders, and then the feed is tightly stuffed into the grid and the thicker is lowered to the depth. The fishing line is stretched and tied to the boat.

As bait can be used both purchased compositions and homemade cereals.

It is important that in the stern the large components:

• warfish
• corn
• rezany worms
• cereals

For the base, a millet porridge is suitable with the addition of cake. The mixture is thoroughly mixed. Other options for porridge, bread, potatoes, etc. come true.

Bait and nozzles for fishing on the ring

When catching bream, various animals and vegetable bait applied.

Among the bait should be noted the worm and maiden. The worm can be stored alone, and it is better to drive a few pieces, piercing in several places. Oparish is naked for a few pieces to make a seductive dish for bream.

From the plant bait is suitable:

• warfish
• perlovka and wheat
• canned corn

Peas and corn features a hook one grain, and the pearfoon and wheat can be driven by 2-3 pcs.

Search for a place of fishing

For catching bream, it is important to choose the correct point of the anchor. It is best to choose a place with. When a flock of fish is found at a depth of 7-9 m, the boat should be bored above the parking lot of fish at 20-30 m.

Lovely places for breaking the bream will be the channel broval, the female depth, the place near the roasters of Korgia, the pool with reverse flow. Since fishing is usually conducted in one place, it is better to spend extra minutes to carefully inspect a perspective place.

In the absence of echo sounder, you can catch up with a lot of heavy loads by applying stepped wiring.

In the presence of hooks, underwater obstacles, you may have to change the place.

Installation tackle with a ring for catching bream from a boat, equipment and equipment catching: