Homemade chainsaw

Using your imagination and mind, even from a simple object, you can make some kind of practical thing. A chainsaw is a versatile tool with which you can build many interesting and useful structures.

The advantage of the chainsaw is its power, as well as its compactness and not very heavy weight. If you confidently own a chainsaw, a welding machine, a grinder, as well as the basics of drawing and design, you can easily make any homemade products from a chainsaw. You can do the following:

Sawmill from a chainsaw

I'll tell you straight: useful crafts from the chainsaw is a sawmill. The coolest model is the Logosol. There are, of course, different handicraft options, but you better see what the meaning of the logosol is:

That is, the basis chainsaw mills constitutes the frame on which the log is installed. The chainsaw is mounted on a movable carriage. To cut a log, you need to turn on the chainsaw and start moving the cart. To proceed to sawing the next board, you need to reduce the height of the chainsaw by the required number of centimeters.

Now watch a video of how this chainsaw craft works - a sawmill.

Motoblock from a chainsaw

A walk-behind tractor from a chainsaw is also excellent, it is a tool for hilling and plowing the soil, it greatly facilitates work in agriculture. It is not difficult to work with such a device, it weighs about 40 kg, it is also equipped with a wheel drive, thanks to which it can easily move around the land. The plowing strip reaches a depth of 20 cm. The plow is independently held in the furrow without the use of human force. After plowing the land, the plow must be replaced with a hiller. In this way, straight ridges of soil can be cut. To dig up potatoes, you need to equip the device with a redeemer and cultivate each row of land.

I understand that on the diagram of this chainsaw craft, everything looks like a complete mess. But, let's start in order: The power unit is a chainsaw. The clutch is automatic, the engine is connected to the housing by a reduction gear. The gearbox is attached at three points: two places to the frame and one place to the front bracket. The frame of the walk-behind tractor is welded from rectangular pipes.

Do-it-yourself chainsaw winch (motor winch)

So, look at the essence of this subtitle. We have unnecessary construction tools, so you can use chainsaw crafts, for example, make chainsaw winch do it yourself: I propose to consider the option of attachment to the chainsaw. In this case, the motor unit will be removable and, if necessary, it can be used for its intended purpose - sawing. In the photo and video below, the winch from the chainsaw pulls the plow.

Moped with motor

All are distinguished by their practicality, but where without it, if a real engine acts as a power unit.

So, you can prepare a frame for a bike or sturdy scooter. The chain and bar must be removed from the chainsaw. Due to the fact that the engine body will be preserved, it will not be difficult to install it to the moped; The centrifugal clutch must be unscrewed from the crankshaft. The bike chain and sprockets will transmit power from the engine. In order to start the moped, it is necessary to lift the wheel off the back. If it is possible to find a chain that will go to the stars on the coupling flange, the coupling can be saved. If the engine of the chainsaw is two-stroke, in addition to gasoline, oil will need to be added, and the centrifugal clutch must be left behind. Rolling off an inclined road without a clutch will cause the engine to burn out; Firmly bolt the remaining sprockets to the rear axle of the moped; leave the motor on the platform and make sure that the stars are at the same level; Bolt the motor to the platform in the drilled places; Pull the chain tightly over the stars. If the bike chain is longer than necessary, remove some of the links; Attach the hand throttle to the handle of the moped and connect its wire to the motor;

All good crafts from the chainsaw and do not be bored.